Bright (uncoated)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A940_ANGLE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A940_ANGLE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A940_DIM.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A940_SIDE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A940_FRONT.png)
![A94025/64](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/logo/DORMER_RED.png)
PFX Long Series Drill
Material ID: 5973129
Long series PFX drill with straight shank, diameter 0.3906" (25/64) with an overall length of 178mm and flute length of 111mm according to DIN/ANSI standard with 130° point angle, cobalt based HSS-E with bright finish, quick spiral and parabolic web for 10xD drilling without pecking in steel, stainless steel and super-alloy
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_COATING_BRIGHT.png)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BMC_HSS-E.png)
High Speed Cobalt Steel Tool Material
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BSG_DIN_ANSI.png)
DIN/ANSI Standards
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_ULDR_10XD.png)
10×D Usable Tool Depth to Diameter Ratio
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_APPA_DRILLPOINT_130.png)
Drill Point 130°
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_SHANK_ZYL.png)
Cylindrical Shank / Straight Shank
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_SPIRALF_W.png)
Quick Spiral Flute Design
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_HAND_RIGHT.png)
Right Hand Rotation / Cutting
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_TCDC_H8.png)
h8 – Industry Standard Tool Tolerance Zone (based on diameter range)
EAN number | 7320760058749 |
Product number (SAP) | 86012011 |
Ordering code ANSI | A94025/64 |
Product Line | PFX |
Gross weight - grams | 82 |
Cutting diameter - fractional inch (DC) | 25/64 |
Cutting diameter - millimeter (DC) | 9.92 mm |
Cutting diameter - inch (DC) | 0.3906 inch |
Length chip flute - millimeter (LCF) | 111 mm |
Overall length - millimeter (OAL) | 178 mm |
Connection diameter - millimeter (DCON MS) | 9.92 mm |
Length chip flute - inch (LCF) | 4.3701 inch |
ISO | A94025/64 |
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 29 m/min | 0.164 mm/rev |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 33 m/min | 0.164 mm/rev |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 34 m/min | 0.164 mm/rev |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 25 m/min | 0.164 mm/rev |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Primary use | 22 m/min | 0.189 mm/rev |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Primary use | 19 m/min | 0.097 mm/rev |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 25 m/min | 0.189 mm/rev |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Primary use | 20 m/min | 0.189 mm/rev |
P3.3 - Alloy steel with a hardness of 260 - 360HB | Primary use | 17 m/min | 0.097 mm/rev |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Primary use | 15 m/min | 0.189 mm/rev |
P4.2 - Tool steel with a hardness of 26 - 39RC | Primary use | 13 m/min | 0.097 mm/rev |
P4.3 - Tool steel with a hardness of 39 - 45HRC | Primary use | 10 m/min | 0.097 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Primary use | 21 m/min | 0.097 mm/rev |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Primary use | 17 m/min | 0.097 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Primary use | 18 m/min | 0.097 mm/rev |
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Primary use | 15 m/min | 0.097 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M3.1 - Stainless steel, austenitic with a hardness of < 200HB | Primary use | 8 m/min | 0.139 mm/rev |
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB | Primary use | 7 m/min | 0.139 mm/rev |
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB | Primary use | 6 m/min | 0.139 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB | Primary use | 9 m/min | 0.079 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Possible use | 20 m/min | 0.263 mm/rev |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Possible use | 16 m/min | 0.263 mm/rev |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Possible use | 13 m/min | 0.226 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Possible use | 17 m/min | 0.263 mm/rev |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Possible use | 13 m/min | 0.263 mm/rev |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Possible use | 11 m/min | 0.226 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Possible use | 16 m/min | 0.263 mm/rev |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Possible use | 12 m/min | 0.263 mm/rev |
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB | Possible use | 9 m/min | 0.226 mm/rev |
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB | Possible use | 8 m/min | 0.226 mm/rev |
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB | Possible use | 6 m/min | 0.226 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Possible use | 18 m/min | 0.263 mm/rev |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Possible use | 14 m/min | 0.263 mm/rev |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Possible use | 11 m/min | 0.226 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Possible use | 53 m/min | 0.226 mm/rev |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Possible use | 40 m/min | 0.226 mm/rev |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Primary use | 27 m/min | 0.417 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Possible use | 62 m/min | 0.417 mm/rev |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Possible use | 55 m/min | 0.417 mm/rev |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Possible use | 40 m/min | 0.417 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Possible use | 119 m/min | 0.189 mm/rev |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Possible use | 70 m/min | 0.164 mm/rev |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Possible use | 35 m/min | 0.164 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N4.1 - Thermoplastic polymers | Possible use | 55 m/min | 0.226 mm/rev |
N4.2 - Thermosetting polymers | Possible use | 40 m/min | 0.164 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S1.1 - Titanium or titanium alloys, with a hardness of <200HB | Primary use | 18 m/min | 0.139 mm/rev |
S1.2 - Titanium alloys, with a hardness of 200 - 280HB | Primary use | 13 m/min | 0.097 mm/rev |
S1.3 - Titanium alloys, a hardness of 280 - 360HB | Primary use | 6 m/min | 0.097 mm/rev |
A94025-64_5973129_3D.stp