A9407/64 | A940

A9407/64

PFX Long Series Drill
Material ID: 5972281

Long series PFX drill with straight shank, diameter 0.1094" (7/64) with an overall length of 117mm and flute length of 64mm according to DIN/ANSI standard with 130° point angle, cobalt based HSS-E with bright finish, quick spiral and parabolic web for 10xD drilling without pecking in steel, stainless steel and super-alloy

info

If you want to see the prices or stock information, please sign in or request access.

Product Feature

Bright (uncoated)

High Speed Cobalt Steel Tool Material

DIN/ANSI Standards

10×D Usable Tool Depth to Diameter Ratio

Drill Point 130°

Cylindrical Shank / Straight Shank

Quick Spiral Flute Design

Right Hand Rotation / Cutting

h8 – Industry Standard Tool Tolerance Zone (based on diameter range)

Product Detail

Description	Value
EAN number	7320760054833
Product number (SAP)	86012085
Ordering code ANSI	A9407/64
Product Line	PFX
Gross weight - grams	11.1
Cutting diameter - fractional inch (DC)	7/64
Cutting diameter - millimeter (DC)	2.78 mm
Cutting diameter - inch (DC)	0.1094 inch
Length chip flute - millimeter (LCF)	64 mm
Overall length - millimeter (OAL)	117 mm
Connection diameter - millimeter (DCON MS)	2.78 mm
Length chip flute - inch (LCF)	2.5197 inch
ISO	A9407/64

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

navigate_next

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	29 m/min	0.068 mm/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	33 m/min	0.068 mm/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	34 m/min	0.068 mm/rev

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	25 m/min	0.068 mm/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	22 m/min	0.078 mm/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Primary use	19 m/min	0.041 mm/rev

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	25 m/min	0.078 mm/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Primary use	20 m/min	0.078 mm/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Primary use	17 m/min	0.041 mm/rev

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Primary use	15 m/min	0.078 mm/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Primary use	13 m/min	0.041 mm/rev
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Primary use	10 m/min	0.041 mm/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

navigate_next

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Primary use	21 m/min	0.041 mm/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Primary use	17 m/min	0.041 mm/rev

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Primary use	18 m/min	0.041 mm/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Primary use	15 m/min	0.041 mm/rev

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Primary use	8 m/min	0.058 mm/rev
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Primary use	7 m/min	0.058 mm/rev
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Primary use	6 m/min	0.058 mm/rev

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Primary use	9 m/min	0.035 mm/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

navigate_next

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Possible use	20 m/min	0.11 mm/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Possible use	16 m/min	0.11 mm/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Possible use	13 m/min	0.094 mm/rev

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Possible use	17 m/min	0.11 mm/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Possible use	13 m/min	0.11 mm/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Possible use	11 m/min	0.094 mm/rev

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Possible use	16 m/min	0.11 mm/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Possible use	12 m/min	0.11 mm/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Possible use	9 m/min	0.094 mm/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Possible use	8 m/min	0.094 mm/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Possible use	6 m/min	0.094 mm/rev

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Possible use	18 m/min	0.11 mm/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Possible use	14 m/min	0.11 mm/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Possible use	11 m/min	0.094 mm/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

navigate_next

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Possible use	53 m/min	0.094 mm/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Possible use	40 m/min	0.094 mm/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Primary use	27 m/min	0.178 mm/rev

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Possible use	62 m/min	0.178 mm/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Possible use	55 m/min	0.178 mm/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Possible use	40 m/min	0.178 mm/rev

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Possible use	119 m/min	0.078 mm/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Possible use	70 m/min	0.068 mm/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Possible use	35 m/min	0.068 mm/rev

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Possible use	55 m/min	0.094 mm/rev
N4.2 - Thermosetting polymers	help_outline Possible use	40 m/min	0.068 mm/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

navigate_next

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.1 - Titanium or titanium alloys, with a hardness of <200HB	help_outline Primary use	18 m/min	0.058 mm/rev
S1.2 - Titanium alloys, with a hardness of 200 - 280HB	help_outline Primary use	13 m/min	0.041 mm/rev
S1.3 - Titanium alloys, a hardness of 280 - 360HB	help_outline Primary use	6 m/min	0.041 mm/rev