R453N25 | R453

R453N25

Force X Drill Oil Feed 5×D
Material ID: 5980021

High-performance FORCE X drill with DIN 6535HA NC parallel shank, diameter 0.1496" (N25) with an overall length of 74mm and flute length of 36mm according to DIN 6537 L standard with 140° modified 4-facet split point, solid carbide with TiAlN coating, continiously thinned parallel web and through coolant holes for 5xD drilling without pecking in steel, stainless steel, cast iron, non-ferrous material, super-alloy and hardened material

info

This item is no longer available. Please contact a member of our team for assistance here.

Product Feature

Titanium Aluminium Nitride Coating

Hard Material (Solid Carbide)

DIN 6537 L

5×D Usable Tool Depth to Diameter Ratio

Drill Point 140°

DIN 6535 HA Cylindrical Shank

Continuously Thinned Web Flute Design

Through Tool Coolant

m7 – Industry Standard Tool Tolerance Zone (based on diameter range)

Product Detail

Description	Value
EAN number	7320760040447
Product number (SAP)	86019149
Ordering code ANSI	R453N25
Product Line	FORCE X
Gross weight - grams	9.177
Cutting diameter (wire gauge size) (DC)	N25
Cutting diameter - millimeter (DC)	3.8 mm
Cutting diameter - inch (DC)	0.1496 inch
Length chip flute - millimeter (LCF)	36 mm
Overall length - millimeter (OAL)	74 mm
Shank length - millimeter (LS)	36 mm
Connection diameter - millimeter (DCON MS)	6 mm
Length chip flute - inch (LCF)	1.4173 inch
ISO	R453N25

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

navigate_next

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	170 m/min	0.112 mm/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	190 m/min	0.112 mm/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	197 m/min	0.112 mm/rev

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	145 m/min	0.112 mm/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	128 m/min	0.112 mm/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Primary use	113 m/min	0.112 mm/rev

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	126 m/min	0.112 mm/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Primary use	102 m/min	0.112 mm/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Primary use	86 m/min	0.112 mm/rev

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Primary use	75 m/min	0.112 mm/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Primary use	64 m/min	0.112 mm/rev
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Primary use	52 m/min	0.078 mm/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

navigate_next

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Possible use	71 m/min	0.112 mm/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Possible use	61 m/min	0.112 mm/rev

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Possible use	64 m/min	0.112 mm/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Possible use	52 m/min	0.112 mm/rev
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB	help_outline Possible use	44 m/min	0.078 mm/rev

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Possible use	39 m/min	0.112 mm/rev
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Possible use	33 m/min	0.112 mm/rev
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Possible use	30 m/min	0.112 mm/rev

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Possible use	29 m/min	0.078 mm/rev
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB	help_outline Possible use	25 m/min	0.078 mm/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

navigate_next

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Primary use	105 m/min	0.146 mm/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Primary use	77 m/min	0.146 mm/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Primary use	58 m/min	0.146 mm/rev

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Primary use	93 m/min	0.112 mm/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Primary use	76 m/min	0.112 mm/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Primary use	61 m/min	0.112 mm/rev

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Primary use	83 m/min	0.112 mm/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Primary use	64 m/min	0.112 mm/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Primary use	51 m/min	0.112 mm/rev

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Primary use	77 m/min	0.112 mm/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Primary use	58 m/min	0.112 mm/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Primary use	43 m/min	0.112 mm/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Primary use	36 m/min	0.112 mm/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Primary use	30 m/min	0.112 mm/rev

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Primary use	86 m/min	0.112 mm/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Primary use	66 m/min	0.112 mm/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Primary use	50 m/min	0.112 mm/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

navigate_next

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Primary use	238 m/min	0.146 mm/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Primary use	179 m/min	0.146 mm/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Primary use	119 m/min	0.146 mm/rev

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Primary use	293 m/min	0.112 mm/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Primary use	263 m/min	0.112 mm/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Primary use	190 m/min	0.112 mm/rev

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	354 m/min	0.146 mm/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	209 m/min	0.146 mm/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Primary use	105 m/min	0.146 mm/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

navigate_next

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.1 - Titanium or titanium alloys, with a hardness of <200HB	help_outline Primary use	52 m/min	0.112 mm/rev
S1.2 - Titanium alloys, with a hardness of 200 - 280HB	help_outline Primary use	43 m/min	0.112 mm/rev
S1.3 - Titanium alloys, a hardness of 280 - 360HB	help_outline Primary use	38 m/min	0.078 mm/rev

H - Hardened materials (any engineering metal with a hardness > 45HRC)

navigate_next

H1 - Chilled cast iron

navigate_next

	Suitability	v_c	f
H1.1 - Chilled cast iron with a hardness of <440HB	help_outline Primary use	53 m/min	0.078 mm/rev

H2 - Hardended cast iron

navigate_next

	Suitability	v_c	f
H2.1 - Hardened cast iron with a hardness <55HRC	help_outline Possible use	31 m/min	0.078 mm/rev
H2.2 - Hardened cast iron with a hardness >55HRC	help_outline Possible use	29 m/min	0.078 mm/rev

H3 - Hardened steel <55HRC

navigate_next

	Suitability	v_c	f
H3.1 - Hardened steel with a hardness of <51HRC	help_outline Possible use	35 m/min	0.078 mm/rev
H3.2 - Hardened steel with a hardness of 51 - 55HRC	help_outline Possible use	29 m/min	0.078 mm/rev

Downloads

R453N25_5980021_3D.stp

file_download

Download