Bright (uncoated)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/B610_SIDE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/B610_SIDE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/B610_DIM.png)
![B610N12](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/logo/DORMER_RED.png)
Chucking Reamer
Material ID: 8157215
Chucking reamer with straight flutes and a cylindrical shank, diameter 0.1890" (N12) with an overall length of 4.1/2" and a flute length of 1.1/8", manufactured in accordance to ANSI B94.2-1983(R1988) standards for reaming precise holes, HSS with bright finish for machining free machining steel, copper or copper alloys
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_COATING_BRIGHT.png)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BODYMATERIALCODE_HSS.png)
High Speed Steel Tool Material
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BSG_ANSI.png)
ANSI – Tap Standards
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_HAND_RIGHT.png)
Right Hand Rotation / Cutting
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_SHANK_ZYL.png)
Cylindrical Shank / Straight Shank
EAN number | 3603607002162 |
Product number (SAP) | 86040739 |
Ordering code ANSI | B610N12 |
Product name | B610N12 |
Gross weight - grams | 16 |
Connection diameter - millimeter (DCON MS) | 4.57 mm |
Cutting diameter - inch (DC) | 0.189 inch |
Cutting edge length - fractional inch (L) | 1.1/8 |
Cutting diameter - millimeter (DC) | 4.8 mm |
Cutting diameter (wire gauge size) (DC) | N12 |
Length chip flute - millimeter (LCF) | 28.58 mm |
Flute count (NOF) | 6 |
Overall length - fractional inch (OAL) | 4.1/2 |
Overall length - millimeter (OAL) | 114.3 mm |
ISO | B610N12 |
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Possible use | 19 m/min | |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 22 m/min | |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 23 m/min |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 16 m/min | |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Possible use | 14 m/min | |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Possible use | 12 m/min |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 11 m/min | |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Possible use | 9 m/min | |
P3.3 - Alloy steel with a hardness of 260 - 360HB | Possible use | 7 m/min |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Primary use | 5 m/min | |
P4.2 - Tool steel with a hardness of 26 - 39RC | Possible use | 4 m/min | |
P4.3 - Tool steel with a hardness of 39 - 45HRC | Possible use |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Possible use | 9 m/min | |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Possible use | 8 m/min |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Possible use | 7 m/min |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Primary use | 14 m/min | |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Possible use | 10 m/min | |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Possible use | 7 m/min |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Primary use | 14 m/min | |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Possible use | 11 m/min | |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Possible use | 9 m/min |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Possible use | 12 m/min | |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Possible use | 9 m/min |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Possible use | 22 m/min | |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Possible use | 16 m/min | |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Possible use | 9 m/min |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Possible use | 25 m/min | |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Possible use | 22 m/min | |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Possible use | 14 m/min |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 45 m/min | |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 26 m/min | |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Possible use | 12 m/min |
Suitability | vc | f | |
---|---|---|---|
N4.1 - Thermoplastic polymers | Possible use | 28 m/min |