Bright (uncoated)
End Mill
Material ID: 8030300
Extra long series End mill with 3 flutes, diameter 6mm with 31mm length of cut and 75mm overall length, according to DORMER standard with a 6mm plain shank, solid carbide with bright finish, 40° helix and 13° rake angle for shoulder milling in non-ferrous metals
Hard Material (Solid Carbide)
Non-ferrous Cutter Type for Soft Malleable Materials
Cut Length, Extra long
40° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
Radial
Dormer Standards
Number of Flutes = 3 (teeth)
Deep Shoulder Milling - Primary use
| EAN number | 7320760950227 |
| Product number (SAP) | 86038240 |
| Ordering code ANSI | S6146.0 |
| Gross weight - grams | 32.6 |
| Cutting diameter - millimeter (DC) | 6 mm |
| Connection diameter - millimeter (DCON MS) | 6 mm |
| Depth of cut maximum - millimeter (APMX) | 31 mm |
| Overall length - millimeter (OAL) | 75 mm |
| Flute count (NOF) | 3 |
| Radial rake angle (GAMF) | 13 |
| ISO | S6146.0 |
- Micrograin Carbide providing extreme hardness and wear resistance providing increased tool life when machining difficult materials
- Suited for precision and high-speed machining of aluminium parts in air frame assembly, automotive applications and die and mold, particularly for prototyping.
- A three-flute design for smooth cutting action and reduced stress on the spindle.
- Specifically designed to provide a high performance and quality surface finish on aluminium and its alloys.
| Suitability | vc | f | |
|---|---|---|---|
| N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Primary use | 638 m/min | |
| N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Primary use | 480 m/min | |
| N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Primary use | 321 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| N2.1 - Cast aluminium alloys with a hardness of < 75HB | Primary use | 321 m/min | |
| N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Primary use | 288 m/min | |
| N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Primary use | 206 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 336 m/min | |
| N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 197 m/min | |
| N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Primary use | 101 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| N4.1 - Thermoplastic polymers | Primary use | 336 m/min | |
| N4.2 - Thermosetting polymers | Primary use | 130 m/min |
S6146_0_8030300_2D.dxf
S6146_0_8030300_3D.stp