Bright (uncoated)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/F300_ANGLE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/F300_ANGLE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/F300_DIM.png)
![F300M10X1.5/16](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/logo/DORMER_RED.png)
M Adjustable Dies
Material ID: 5978722
Adjustable circular split die, for ISO-Metric thread M10 with 1.50 mm pitch, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.15mm, dimensions according to BS 1127:1950 standard with 1.5/16" outside diameter and 7/16" thickness, HSS with bright finish for threading in free machining and plain carbon steel, ferritic stainless steel and gray, malleable, ductile and compacted graphite cast-iron
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_COATING_BRIGHT.png)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_THREADFORM_M.png)
Thread Form, Metric Coarse
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BSG_BS1127_1950.png)
BS 1127:1950 – Round Dies Standards
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_DIECHAM_1_75.png)
Die Thread Chamfer to Pitch Ratio (1.75×TP)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BODYMATERIALCODE_HSS.png)
High Speed Steel Tool Material
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_HAND_RIGHT.png)
Right Hand Rotation / Cutting
EAN number | 7320760205310 |
Product number (SAP) | 86017954 |
Ordering code ANSI | F300M10X1.5/16 |
Gross weight - grams | 48.9 |
Thread diameter - millimeter (TD) | 10 mm |
Thread pitch - millimeter (TP) | 1.5 mm |
Body diameter - fractional inch (BD) | 1.5/16 |
Overall length - fractional inch (OAL) | 7/16 |
Body diameter - inch (BD) | 1.3125 inch |
ISO | F300M10X1.5/16 |
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 12 m/min | |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 13 m/min | |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 14 m/min |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 10 m/min | |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Primary use | 9 m/min | |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Possible use | 8 m/min |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 8 m/min | |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Possible use | 7 m/min |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Possible use | 5 m/min |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Primary use | 7 m/min | |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Primary use | 6 m/min |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Primary use | 6 m/min | |
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Possible use | 5 m/min |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Primary use | 11 m/min | |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Primary use | 8 m/min | |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Possible use | 6 m/min |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Primary use | 11 m/min | |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Primary use | 9 m/min | |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Possible use | 7 m/min |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Primary use | 10 m/min | |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Primary use | 8 m/min | |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Possible use | 6 m/min |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Primary use | 10 m/min | |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Primary use | 8 m/min | |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Possible use | 6 m/min |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Possible use | 20 m/min | |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Possible use | 15 m/min | |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Possible use | 10 m/min |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Possible use | 10 m/min | |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Possible use | 9 m/min | |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Possible use | 6 m/min |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 11 m/min | |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Possible use | 6 m/min | |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Possible use | 3 m/min |
Suitability | vc | f | |
---|---|---|---|
N4.1 - Thermoplastic polymers | Possible use | 11 m/min | |
N4.2 - Thermosetting polymers | Possible use | 4 m/min | |
N4.3 - Reinforced polymers or composites | Possible use | 4 m/min |
Material ID : 5978855