Finishing – very good surface quality - Primary use
Boring Bar Carbide ISO S - Left Hand
Material ID: 6760594
Screw clamp boring bar for holding a 80° trigon positive insert with an inscribed circle diameter of 3.97mm, 1.59mm thick (ISO designation WC.. 0201.. ), left hand 93° end cutting with off-set shank, carbide with coolant hole, 6mm diameter x 90mm long for taper boring and longitudinal boring with and without shoulder
Medium machining – good surface quality - Primary use
Roughing – unlimited surface roughness - Primary use
Heavy working conditions
Suitable for unstable working conditions - Primary use
Suitable for stable working conditions - Primary use
S – Screw clamp
Left Hand Rotation / Cutting
Through Tool Coolant
Chamfering (bevelling) in hole - Possible use
Cone turning – internal - Primary use
Longitudinal turning with shoulder – internal - Primary use
Longitudinal turning without shoulder – internal - Primary use
| EAN number | 3603602959409 |
| Product number (SAP) | 86003416 |
| Ordering code ANSI | E06G-SWUCL 02 |
| Gross weight - grams | 42.2 |
| Connection diameter - millimeter (DCON MS) | 6 mm |
| Minimum bore diameter - millimeter (DMIN) | 7.8 mm |
| Functional width - millimeter (WF) | 3.9 mm |
| Functional length - millimeter (LF) | 95 mm |
| Axial rake angle (GAMP) | -12 |
| Net weight - grams | 42.2 |
| Insert size | 02 |
| ISO | E06G-SWUCL02 |
Select
Select
Select
Select
Material ID : 6756166
Material ID : 6756167
Material ID : 6756313
Material ID : 7156799
Material ID : 6756312
Material ID : 7156800
Material ID : 7977277
Material ID : 7977278
Material ID : 7080640