S22618.0

Finishing End Mill
Material ID: 6706788

Long series finishing end mill with 8 flutes, diameter 18mm with 57mm length of cut, 125mm overall length and 85mm reach with neck relief, according to DORMER standard with a 18mm plain shank, solid carbide with AlTiN coating, 50° helix and 3° rake angle for shoulder milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel and high-temperature alloys

info

If you want to see the prices or stock information, please sign in or request access.

Product Feature

Aluminium Titanium Nitride Coating

Hard Material (Solid Carbide)

General Purpose Cutter Type for Low to High Resistance Materials

Cut Length, Long

50° Helix Angle (Flute)

DIN 6535 HA Cylindrical Shank

h9 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial

Dormer Standards

Number of Flutes = 8 (teeth)

Product Operation

Deep Shoulder Milling - Primary use

Product Detail

Description	Value
EAN number	7320760683378
Product number (SAP)	86021925
Ordering code ANSI	S22618.0
Gross weight - grams	410
Cutting diameter - millimeter (DC)	18 mm
Connection diameter - millimeter (DCON MS)	18 mm
Depth of cut maximum - millimeter (APMX)	57 mm
Overall length - millimeter (OAL)	125 mm
Flute count (NOF)	8
Usable Length - millimeter (LU)	85 mm
Neck diameter - millimeter (DN)	17 mm
Radial rake angle (GAMF)	3
With Neck	Yes
ISO	S22618.0

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Primary use	64 m/min	0.044 mm/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB	help_outline Primary use	64 m/min	0.044 mm/rev

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Primary use	65 m/min	0.035 mm/rev

M4

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Primary use	64 m/min	0.035 mm/rev
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB	help_outline Primary use	54 m/min	0.035 mm/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

S1

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.3 - Titanium alloys, a hardness of 280 - 360HB	help_outline Primary use	46 m/min	0.035 mm/rev

S2

S2 - Fe-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S2.2 - High-temperature Fe-based alloys with a hardness of 200-280HB	help_outline Primary use	38 m/min	0.035 mm/rev

S3

S3 - Ni-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S3.2 - High-temperature Ni-based alloys with a hardness of 280 - 360HB	help_outline Primary use	26 m/min	0.035 mm/rev

S4

S4 - Co-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S4.2 - High-temperature Co-based alloys with a hardness of 240 - 320HB	help_outline Primary use	22 m/min	0.035 mm/rev