E300M20X1.5

MF Machine Tap Spiral Flute 40°, Yellow Shark
Material ID: 6290624

Spiral flute tap Yellow Shark with chamfer form C with a 2-3xP plug lead, for ISO-Metric Fine thread M20 with 1.50 mm pitch and 6H class of fit, dimensions according to DIN 374 standard with 16.0mm shank and 12.0mm square drive, powder metallurgical HSS-E with flash chorme surface finish and 40° helix angle for 2xD blind hole threading in free machining and plain carbon steel and copper or copper alloys

info

If you want to see the prices or stock information, please sign in or request access.

Product Feature

Flash Chrome (Hard Chrome) Plating

Thread Form, Metric Fine

DIN 374 – MF Thread Standard

DIN Thread Pitch Diameter Tolerance Zone (high basic pitch diameter)

Blind Hole Application

2×D Usable Tool Depth to Diameter Ratio

High Speed Cobalt Powder Metal Tool Material

Semi-Bottoming Tap Chamfer (2 – 3 Pitch Lead)

Spiral Flute Geometry

40° Helix Angle (Flute)

Right Hand Rotation / Cutting

Product Detail

Description	Value
Product name	E300M20X1.5
Product number (SAP)	86016125
EAN number	7320760663448
Product Line	SHARK
Thread diameter size (TDZ)	20
Thread pitch - millimeter (TP)	1.5 mm
Overall length - millimeter (OAL)	125 mm
Overall length - inch (OAL)	4.9213 inch
Threading length - millimeter (THL)	17 mm
Threading length - inch (THL)	0.6693 inch
Connection diameter - inch (DCON MS)	0.6299 inch
Connection diameter - millimeter (DCON MS)	16 mm
Flute count (NOF)	5
Clamping width - inch (WSC)	0.4724 inch
Clamping width - millimeter (WSC)	12 mm
Clamping Length - inch (LCS)	0.5906 inch
Clamping Length - millimeter (LSC)	15 mm
Premachined hole diameter - inch (PHD)	0.7283 inch
Premachined hole diameter - millimeter (PHD)	18.5 mm
Gross weight - grams	179
ISO	E300M20X1.5
Ordering code ANSI	E300M20X1.5

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	23 m/min
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	25 m/min
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	26 m/min

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	19 m/min
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	17 m/min
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Possible use	15 m/min

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	14 m/min
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Possible use	11 m/min

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Possible use	8 m/min

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	48 m/min
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	28 m/min
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Possible use	14 m/min