R1001.3

Jobber Drill
Material ID: 5979865

Jobber length drill with straight shank, diameter 1.3mm with an overall length of 38mm and flute length of 16mm according to DIN 338 standard with 120° point angle, solid carbide with bright finish for 4xD drilling without pecking in non-ferrous material

info

This item is no longer available. Please find a similar or direct replacement or contact a member of our team for assistance here.

Product Feature

Bright (uncoated)

Hard Material (Solid Carbide)

DIN 338 – Straight Shank Drill Standards

4×D Usable Tool Depth to Diameter Ratio

Drill Point 120°

Cylindrical Shank / Straight Shank

Standard Spiral Flute Design

Right Hand Rotation / Cutting

h7 – Industry Standard Tool Tolerance Zone (based on diameter range)

Product Detail

Description	Value
EAN number	7320760344811
Product number (SAP)	86018770
Ordering code ANSI	R1001.3
Gross weight - grams	3.3
Cutting diameter - millimeter (DC)	1.3 mm
Cutting diameter - inch (DC)	0.0512 inch
Length chip flute - millimeter (LCF)	16 mm
Overall length - millimeter (OAL)	38 mm
Connection diameter - millimeter (DCON MS)	1.3 mm
Length chip flute - inch (LCF)	0.6299 inch
ISO	R1001.3

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Possible use	99 m/min	0.01 mm/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Possible use	111 m/min	0.01 mm/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Possible use	115 m/min	0.01 mm/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Possible use	85 m/min	0.01 mm/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Possible use	75 m/min	0.01 mm/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Possible use	66 m/min	0.01 mm/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Possible use	66 m/min	0.01 mm/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Possible use	53 m/min	0.01 mm/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Possible use	45 m/min	0.01 mm/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Possible use	40 m/min	0.01 mm/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Possible use	34 m/min	0.01 mm/rev
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Possible use	27 m/min	0.01 mm/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Possible use	75 m/min	0.019 mm/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Possible use	56 m/min	0.019 mm/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Possible use	42 m/min	0.019 mm/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Possible use	68 m/min	0.019 mm/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Possible use	55 m/min	0.019 mm/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Possible use	44 m/min	0.019 mm/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Possible use	60 m/min	0.019 mm/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Possible use	46 m/min	0.019 mm/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Possible use	37 m/min	0.019 mm/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Possible use	55 m/min	0.019 mm/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Possible use	42 m/min	0.019 mm/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Possible use	31 m/min	0.019 mm/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Possible use	26 m/min	0.019 mm/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Possible use	22 m/min	0.019 mm/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Possible use	63 m/min	0.019 mm/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Possible use	47 m/min	0.019 mm/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Possible use	37 m/min	0.019 mm/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Possible use	200 m/min	0.047 mm/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Possible use	150 m/min	0.047 mm/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Possible use	100 m/min	0.047 mm/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Possible use	172 m/min	0.047 mm/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Possible use	155 m/min	0.047 mm/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Possible use	112 m/min	0.047 mm/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	423 m/min	0.047 mm/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	250 m/min	0.047 mm/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Primary use	60 m/min	0.07 mm/rev
N4.2 - Thermosetting polymers	help_outline Primary use	100 m/min	0.047 mm/rev

H - Hardened materials (any engineering metal with a hardness > 45HRC)

H1

H1 - Chilled cast iron

navigate_next

	Suitability	v_c	f
H1.1 - Chilled cast iron with a hardness of <440HB	help_outline Possible use	56 m/min	0.01 mm/rev

H2

H2 - Hardended cast iron

navigate_next

	Suitability	v_c	f
H2.1 - Hardened cast iron with a hardness <55HRC	help_outline Possible use	33 m/min	0.01 mm/rev
H2.2 - Hardened cast iron with a hardness >55HRC	help_outline Possible use	36 m/min	0.01 mm/rev

H3

H3 - Hardened steel <55HRC

navigate_next

	Suitability	v_c	f
H3.1 - Hardened steel with a hardness of <51HRC	help_outline Possible use	37 m/min	0.01 mm/rev
H3.2 - Hardened steel with a hardness of 51 - 55HRC	help_outline Possible use	30 m/min	0.01 mm/rev

Related Parts

Replacement

Material application

Select

Downloads

R1001_3_5979865_3D

stp

Download

R1001.3

Product Feature

Product Detail

Cutting Conditions

P1

P2

P3

P4

K1

K2

K3

K4

K5

N1

N2

N3

N4

H1

H2

H3

Related Parts

R003

Downloads