Titanium Silicon Nitride Coating






S2292.0XD4
Ball-Nosed End Mill
Material ID: 6706517
Extra short series ball-nose end mill with 2 flutes, diameter 2mm with 4mm length of cut, 50mm overall length, 8mm reach with neck relief and 1mm full profile radius, according to DORMER standard with a 4mm plain shank, solid carbide with TiSiN coating, 30° helix and 3° rake angle for copy milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel and high-temperature alloys
Product Feature


Hard Material (Solid Carbide)

General Purpose Cutter Type for Low to High Resistance Materials

Cut Length, Extra Short

30° Helix Angle (Flute)

DIN 6535 HA Cylindrical Shank

h9 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial, Diagonal

Dormer Standards

Number of Flutes = 2 (teeth)
Product Operation

Contoured Surfaces (Copy Milling) - Primary use
Product Detail
Description | Value |
---|---|
EAN number | 7320760680667 |
Product number (SAP) | 86021657 |
Ordering code ANSI | S2292.0XD4 |
Gross weight - grams | 13.3 |
Cutting diameter - millimeter (DC) | 2 mm |
Corner radius - millimeter (RE) | 1 mm |
Connection diameter - millimeter (DCON MS) | 4 mm |
Depth of cut maximum - millimeter (APMX) | 4 mm |
Overall length - millimeter (OAL) | 50 mm |
Flute count (NOF) | 2 |
Usable Length - millimeter (LU) | 8 mm |
Neck diameter - millimeter (DN) | 1.9 mm |
Radial rake angle (GAMF) | 3 |
With Neck | Yes |
ISO | S2292.0XD4 |
Brand Name | Dormer Pramet |
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P4.3 - Tool steel with a hardness of 39 - 45HRC | Primary use | 80 m/min | 0.004 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB | Primary use | 80 m/min | 0.004 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB | Primary use | 82 m/min | 0.003 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB | Primary use | 80 m/min | 0.003 mm/rev |
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB | Primary use | 68 m/min | 0.003 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S1.3 - Titanium alloys, a hardness of 280 - 360HB | Primary use | 58 m/min | 0.003 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S2.2 - High-temperature Fe-based alloys with a hardness of 200-280HB | Primary use | 47 m/min | 0.003 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S3.2 - High-temperature Ni-based alloys with a hardness of 280 - 360HB | Primary use | 33 m/min | 0.003 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S4.2 - High-temperature Co-based alloys with a hardness of 240 - 320HB | Primary use | 27 m/min | 0.003 mm/rev |