Aluminium Chromium Nitride Coating
Slot Drill
Material ID: 5983441
Extra short series slot drill with 2 flutes, diameter 4mm with 5mm length of cut, 54mm overall length and 0.13mm 45° chamfered corner edges, according to DIN 6527 K standard with a 6mm plain shank, solid carbide with AlCrN coating, 28° helix and 9° rake angle for slot milling and ramping in steel and cast steel, ferritic, martensitic and austenitic stainless steel, cast-iron and cast aluminium and copper or copper alloys
Hard Material (Solid Carbide)
General Purpose Cutter Type for Low to High Resistance Materials
Cut Length, Extra Short
28° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
Radial, Diagonal, Axial
DIN 6527 K – Carbide End Mill Standards
Number of Flutes = 2 (teeth)
Shallow Shoulder Milling - Possible use
Plunge Milling - Possible use
Shallow Slot Milling - Primary use
Deep Slot Milling - Primary use
Ramping - Primary use
Helical Interpolation - Possible use
Drilling - Possible use
P9 Slotting (Keyway) - Primary use
| EAN number | 7320760640456 |
| Product number (SAP) | 86020056 |
| Ordering code ANSI | S802HA4.0 |
| Gross weight - grams | 21.5 |
| Cutting diameter - millimeter (DC) | 4 mm |
| Corner chamfer width - millimeter (CHW) | 0.13 mm |
| Connection diameter - millimeter (DCON MS) | 6 mm |
| Depth of cut maximum - millimeter (APMX) | 5 mm |
| Overall length - millimeter (OAL) | 54 mm |
| Flute count (NOF) | 2 |
| Radial rake angle (GAMF) | 9 |
| ISO | S802HA4.0 |
S802HA4_0_5983441_2D.dxf
S802HA4_0_5983441_3D.stp