R1203.0

Stub Drill
Material ID: 5979412

Stub length drill with straight shank, diameter 3mm with an overall length of 46mm and flute length of 16mm according to DIN 6539 standard with 120° point angle, solid carbide with bright finish for 2.5xD drilling without pecking in non-ferrous material

info

This item is no longer available. Please find a similar or direct replacement or contact a member of our team for assistance here.

Product Feature

Bright (uncoated)

Hard Material (Solid Carbide)

DIN 6539

2.5×D Usable Tool Depth to Diameter Ratio

Drill Point 120°

Cylindrical Shank / Straight Shank

Standard Spiral Flute Design

Right Hand Rotation / Cutting

h7 – Industry Standard Tool Tolerance Zone (based on diameter range)

Product Detail

Description	Value
EAN number	7320760114216
Product number (SAP)	86018891
Ordering code ANSI	R1203.0
Gross weight - grams	7.6
Cutting diameter - millimeter (DC)	3 mm
Cutting diameter - inch (DC)	0.1181 inch
Length chip flute - millimeter (LCF)	16 mm
Overall length - millimeter (OAL)	46 mm
Connection diameter - millimeter (DCON MS)	3 mm
Length chip flute - inch (LCF)	0.6299 inch
ISO	R1203.0

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Possible use	99 m/min	0.02 mm/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Possible use	111 m/min	0.02 mm/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Possible use	115 m/min	0.02 mm/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Possible use	85 m/min	0.02 mm/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Possible use	75 m/min	0.02 mm/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Possible use	66 m/min	0.02 mm/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Possible use	66 m/min	0.02 mm/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Possible use	53 m/min	0.02 mm/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Possible use	45 m/min	0.02 mm/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Possible use	40 m/min	0.02 mm/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Possible use	34 m/min	0.02 mm/rev
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Possible use	27 m/min	0.02 mm/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Possible use	75 m/min	0.07 mm/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Possible use	56 m/min	0.07 mm/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Possible use	42 m/min	0.07 mm/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Possible use	68 m/min	0.07 mm/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Possible use	55 m/min	0.07 mm/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Possible use	44 m/min	0.07 mm/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Possible use	60 m/min	0.07 mm/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Possible use	46 m/min	0.07 mm/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Possible use	37 m/min	0.07 mm/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Possible use	55 m/min	0.07 mm/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Possible use	42 m/min	0.07 mm/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Possible use	31 m/min	0.07 mm/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Possible use	26 m/min	0.07 mm/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Possible use	22 m/min	0.07 mm/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Possible use	63 m/min	0.07 mm/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Possible use	47 m/min	0.07 mm/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Possible use	37 m/min	0.07 mm/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Primary use	200 m/min	0.13 mm/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Primary use	150 m/min	0.13 mm/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Possible use	100 m/min	0.13 mm/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Possible use	172 m/min	0.13 mm/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Possible use	155 m/min	0.13 mm/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Possible use	112 m/min	0.13 mm/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Possible use	466 m/min	0.13 mm/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Possible use	275 m/min	0.13 mm/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Primary use	138 m/min	0.13 mm/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Primary use	60 m/min	0.07 mm/rev
N4.2 - Thermosetting polymers	help_outline Primary use	100 m/min	0.07 mm/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

S1

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.1 - Titanium or titanium alloys, with a hardness of <200HB	help_outline Primary use	45 m/min	0.04 mm/rev
S1.2 - Titanium alloys, with a hardness of 200 - 280HB	help_outline Possible use	35 m/min	0.04 mm/rev
S1.3 - Titanium alloys, a hardness of 280 - 360HB	help_outline Possible use	25 m/min	0.04 mm/rev

S2

S2 - Fe-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S2.1 - High-temperature Fe-based alloys with a hardness of <200HB	help_outline Possible use	40 m/min	0.04 mm/rev
S2.2 - High-temperature Fe-based alloys with a hardness of 200-280HB	help_outline Possible use	28 m/min	0.04 mm/rev

S3

S3 - Ni-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S3.1 - High-temperature Ni-based alloys with a hardness of <280HB	help_outline Possible use	30 m/min	0.04 mm/rev
S3.2 - High-temperature Ni-based alloys with a hardness of 280 - 360HB	help_outline Possible use	20 m/min	0.04 mm/rev

S4

S4 - Co-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S4.1 - High-temperature Co-based alloys with a hardness of <240HB	help_outline Possible use	23 m/min	0.04 mm/rev
S4.2 - High-temperature Co-based alloys with a hardness of 240 - 320HB	help_outline Possible use	16 m/min	0.04 mm/rev

H - Hardened materials (any engineering metal with a hardness > 45HRC)

H1

H1 - Chilled cast iron

navigate_next

	Suitability	v_c	f
H1.1 - Chilled cast iron with a hardness of <440HB	help_outline Possible use	56 m/min	0.02 mm/rev

H2

H2 - Hardended cast iron

navigate_next

	Suitability	v_c	f
H2.1 - Hardened cast iron with a hardness <55HRC	help_outline Possible use	33 m/min	0.02 mm/rev
H2.2 - Hardened cast iron with a hardness >55HRC	help_outline Possible use	36 m/min	0.02 mm/rev

H3

H3 - Hardened steel <55HRC

navigate_next

	Suitability	v_c	f
H3.1 - Hardened steel with a hardness of <51HRC	help_outline Possible use	37 m/min	0.02 mm/rev
H3.2 - Hardened steel with a hardness of 51 - 55HRC	help_outline Possible use	30 m/min	0.02 mm/rev

Related Parts

Replacement

Material application

Select

Downloads

R1203_0_5979412_3D

stp

Download

R1203.0

Product Feature

Product Detail

Cutting Conditions

P1

P2

P3

P4

K1

K2

K3

K4

K5

N1

N2

N3

N4

S1

S2

S3

S4

H1

H2

H3

Related Parts

R023

Downloads