R4531/2

Force X Drill Oil Feed 5×D
Material ID: 5979921

High-performance FORCE X drill with DIN 6535HA NC parallel shank, diameter 0.5000" (1/2) with an overall length of 124mm and flute length of 76mm according to DIN 6537 L standard with 140° modified 4-facet split point, solid carbide with TiAlN coating, continiously thinned parallel web and through coolant holes for 5xD drilling without pecking in steel, stainless steel, cast iron, non-ferrous material, super-alloy and hardened material

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

Product Feature

Titanium Aluminium Nitride Coating

Hard Material (Solid Carbide)

DIN 6537 L

5×D Usable Tool Depth to Diameter Ratio

Drill Point 140°

DIN 6535 HA Cylindrical Shank

Continuously Thinned Web Flute Design

Through Tool Coolant

m7 – Industry Standard Tool Tolerance Zone (based on diameter range)

Product Detail

Description	Value
EAN number	7320760623596
Product number (SAP)	86018975
Ordering code ANSI	R4531/2
Product Line	FORCE X
Gross weight - grams	181
Cutting diameter - fractional inch (DC)	1/2
Cutting diameter - millimeter (DC)	12.7 mm
Cutting diameter - inch (DC)	0.5 inch
Length chip flute - millimeter (LCF)	76 mm
Overall length - millimeter (OAL)	124 mm
Shank length - millimeter (LS)	45 mm
Connection diameter - millimeter (DCON MS)	14 mm
Length chip flute - inch (LCF)	2.9921 inch
ISO	R4531/2

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	170 m/min	0.287 mm/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	190 m/min	0.287 mm/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	197 m/min	0.287 mm/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	145 m/min	0.287 mm/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	128 m/min	0.287 mm/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Primary use	113 m/min	0.287 mm/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	126 m/min	0.287 mm/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Primary use	102 m/min	0.287 mm/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Primary use	86 m/min	0.287 mm/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Primary use	75 m/min	0.287 mm/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Primary use	64 m/min	0.287 mm/rev
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Primary use	52 m/min	0.205 mm/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Possible use	71 m/min	0.287 mm/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Possible use	61 m/min	0.287 mm/rev

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Possible use	64 m/min	0.287 mm/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Possible use	52 m/min	0.287 mm/rev
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB	help_outline Possible use	44 m/min	0.205 mm/rev

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Possible use	39 m/min	0.287 mm/rev
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Possible use	33 m/min	0.287 mm/rev
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Possible use	30 m/min	0.287 mm/rev

M4

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Possible use	29 m/min	0.205 mm/rev
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB	help_outline Possible use	25 m/min	0.205 mm/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Primary use	105 m/min	0.389 mm/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Primary use	77 m/min	0.389 mm/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Primary use	58 m/min	0.389 mm/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Primary use	93 m/min	0.287 mm/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Primary use	76 m/min	0.287 mm/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Primary use	61 m/min	0.287 mm/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Primary use	83 m/min	0.287 mm/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Primary use	64 m/min	0.287 mm/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Primary use	51 m/min	0.287 mm/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Primary use	77 m/min	0.287 mm/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Primary use	58 m/min	0.287 mm/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Primary use	43 m/min	0.287 mm/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Primary use	36 m/min	0.287 mm/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Primary use	30 m/min	0.287 mm/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Primary use	86 m/min	0.287 mm/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Primary use	66 m/min	0.287 mm/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Primary use	50 m/min	0.287 mm/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Primary use	238 m/min	0.389 mm/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Primary use	179 m/min	0.389 mm/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Primary use	119 m/min	0.389 mm/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Primary use	293 m/min	0.287 mm/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Primary use	263 m/min	0.287 mm/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Primary use	190 m/min	0.287 mm/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	354 m/min	0.389 mm/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	209 m/min	0.389 mm/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Primary use	105 m/min	0.389 mm/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

S1

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.1 - Titanium or titanium alloys, with a hardness of <200HB	help_outline Primary use	52 m/min	0.287 mm/rev
S1.2 - Titanium alloys, with a hardness of 200 - 280HB	help_outline Primary use	43 m/min	0.287 mm/rev
S1.3 - Titanium alloys, a hardness of 280 - 360HB	help_outline Primary use	38 m/min	0.205 mm/rev

H - Hardened materials (any engineering metal with a hardness > 45HRC)

H1

H1 - Chilled cast iron

navigate_next

	Suitability	v_c	f
H1.1 - Chilled cast iron with a hardness of <440HB	help_outline Primary use	53 m/min	0.205 mm/rev

H2

H2 - Hardended cast iron

navigate_next

	Suitability	v_c	f
H2.1 - Hardened cast iron with a hardness <55HRC	help_outline Possible use	31 m/min	0.205 mm/rev
H2.2 - Hardened cast iron with a hardness >55HRC	help_outline Possible use	29 m/min	0.205 mm/rev

H3

H3 - Hardened steel <55HRC

navigate_next

	Suitability	v_c	f
H3.1 - Hardened steel with a hardness of <51HRC	help_outline Possible use	35 m/min	0.205 mm/rev
H3.2 - Hardened steel with a hardness of 51 - 55HRC	help_outline Possible use	29 m/min	0.205 mm/rev

Downloads

R4531-2_5979921_3D

stp

Download