Bright (uncoated)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/C110_ANGLE1.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/C110_ANGLE1.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/C110_DIM.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/C110_SIDE1.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/C110_FRONT.png)
![C11010.0](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/logo/DORMER_RED.png)
C11010.0
Slot Drill
Material ID: 5983791
Extra short series slot drill with 2 flutes, diameter 10mm with 13mm length of cut, 63mm overall length and 22.5mm reach with neck relief, according to DIN 327 D standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys
Product Feature
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_COATING_BRIGHT.png)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BODYMATERIALCODE_HSS-E_PM.png)
High Speed Cobalt Powder Metal Tool Material
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_MILLPROFILE_N.png)
General Purpose Cutter Type for Low to High Resistance Materials
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_MILLLENGTH_XS.png)
Cut Length, Extra Short
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_FLUTEHELIXANGLE_30.png)
30° Helix Angle (Flute)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_SHANK_ZYL_WELDONDIN1835B.png)
DIN 1835B Weldon Shank
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_TCDC_E8.png)
e8 – Industry Standard Tool Tolerance Zone (based on diameter range)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_MILLDIRECTION_TYPE1.png)
Radial, Diagonal, Axial
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BSG_DIN327D.png)
DIN 327 D – Slot Drill Standards
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_TEETH_Z2.png)
Number of Flutes = 2 (teeth)
Product Operation
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_OP_LOWSHOULDERMILLING.png)
Shallow Shoulder Milling - Primary use
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_OP_LOWSLOTMILLING.png)
Shallow Slot Milling - Primary use
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_OP_RAMPING.png)
Ramping - Primary use
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_OP_DRILLING_G.png)
Drilling - Possible use
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_OP_KEYSLOTMILLINGP9.png)
P9 Slotting (Keyway) - Primary use
Product Detail
Description | Value |
---|---|
EAN number | 7320760353196 |
Product number (SAP) | 86013323 |
Ordering code ANSI | C11010.0 |
Gross weight - grams | 36.7 |
Cutting diameter - millimeter (DC) | 10 mm |
Connection diameter - millimeter (DCON MS) | 10 mm |
Depth of cut maximum - millimeter (APMX) | 13 mm |
Overall length - millimeter (OAL) | 63 mm |
Flute count (NOF) | 2 |
Usable Length - millimeter (LU) | 22.5 mm |
Neck diameter - millimeter (DN) | 9.5 mm |
Radial rake angle (GAMF) | 12 |
With Neck | Yes |
ISO | C11010.0 |
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 53 m/min | 0.023 mm/rev |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 59 m/min | 0.023 mm/rev |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 61 m/min | 0.023 mm/rev |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 45 m/min | 0.023 mm/rev |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Possible use | 40 m/min | 0.023 mm/rev |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Possible use | 37 m/min | 0.023 mm/rev |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Possible use | 30 m/min | 0.018 mm/rev |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Possible use | 22 m/min | 0.018 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Possible use | 41 m/min | 0.023 mm/rev |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Possible use | 35 m/min | 0.023 mm/rev |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Possible use | 37 m/min | 0.023 mm/rev |
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Possible use | 30 m/min | 0.018 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Possible use | 35 m/min | 0.023 mm/rev |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Possible use | 26 m/min | 0.023 mm/rev |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Possible use | 19 m/min | 0.023 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Possible use | 62 m/min | 0.023 mm/rev |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Possible use | 50 m/min | 0.023 mm/rev |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Possible use | 40 m/min | 0.018 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Possible use | 54 m/min | 0.023 mm/rev |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Possible use | 42 m/min | 0.023 mm/rev |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Possible use | 34 m/min | 0.018 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Possible use | 50 m/min | 0.018 mm/rev |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Possible use | 38 m/min | 0.018 mm/rev |
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB | Possible use | 28 m/min | 0.018 mm/rev |
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB | Possible use | 24 m/min | 0.015 mm/rev |
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB | Possible use | 20 m/min | 0.015 mm/rev |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Possible use | 57 m/min | 0.018 mm/rev |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Possible use | 43 m/min | 0.018 mm/rev |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Possible use | 33 m/min | 0.018 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Possible use | 95 m/min | 0.033 mm/rev |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Possible use | 71 m/min | 0.028 mm/rev |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Possible use | 48 m/min | 0.028 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Possible use | 48 m/min | 0.023 mm/rev |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Possible use | 43 m/min | 0.023 mm/rev |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Possible use | 31 m/min | 0.023 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 50 m/min | 0.023 mm/rev |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 29 m/min | 0.023 mm/rev |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Primary use | 15 m/min | 0.023 mm/rev |
Suitability | vc | f | |
---|---|---|---|
N4.1 - Thermoplastic polymers | Possible use | 50 m/min | 0.023 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S1.1 - Titanium or titanium alloys, with a hardness of <200HB | Primary use | 35 m/min | 0.018 mm/rev |
S1.2 - Titanium alloys, with a hardness of 200 - 280HB | Possible use | 25 m/min | 0.018 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S2.1 - High-temperature Fe-based alloys with a hardness of <200HB | Possible use | 20 m/min | 0.015 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S3.1 - High-temperature Ni-based alloys with a hardness of <280HB | Possible use | 15 m/min | 0.015 mm/rev |
Suitability | vc | f | |
---|---|---|---|
S4.1 - High-temperature Co-based alloys with a hardness of <240HB | Possible use | 12 m/min | 0.015 mm/rev |