R9601.1/32

Hydra Drill Head for Stainless Steel
Material ID: 5988908

High-performance replaceable drill head HYDRA M, diameter 1.0313" (1.1/32) according to DORMER standard with 140° modified 4-facet split point, solid carbide with Ti-phon coating for drilling stainless steel in combination with HYDRA body size 1.3/64" or 26mm, H853 for up to 3xD, H855 for up to 5xD or H858 for up to 8xD

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

Product Feature

Special TiAlN Coating (+ Silicon + Chromium)

Hard Material (Solid Carbide)

Dormer Standards

Drill Point 140°

Right Hand Rotation / Cutting

Through Tool Coolant

h7 – Industry Standard Tool Tolerance Zone (based on diameter range)

Product Detail

Description	Value
EAN number	7320760018972
Product number (SAP)	80024100
Ordering code ANSI	R9601.1/32
Product Line	HYDRA
Gross weight - grams	55.7
Cutting diameter - fractional inch (DC)	1.1/32
Cutting diameter - millimeter (DC)	26.19 mm
Cutting diameter - inch (DC)	1.0313 inch
Head length - millimeter (LH)	16.4 mm
ISO	R9601.1/32

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	133 m/min	0.475 mm/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	148 m/min	0.475 mm/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	154 m/min	0.475 mm/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	114 m/min	0.475 mm/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Primary use	82 m/min	0.41 mm/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Primary use	70 m/min	0.41 mm/rev

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Primary use	73 m/min	0.41 mm/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Primary use	60 m/min	0.41 mm/rev
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB	help_outline Possible use	50 m/min	0.215 mm/rev

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Primary use	58 m/min	0.215 mm/rev
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Primary use	50 m/min	0.215 mm/rev
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Primary use	45 m/min	0.215 mm/rev

M4

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Primary use	40 m/min	0.215 mm/rev
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB	help_outline Possible use	34 m/min	0.215 mm/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Primary use	120 m/min	0.41 mm/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Primary use	89 m/min	0.41 mm/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Primary use	67 m/min	0.41 mm/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Possible use	108 m/min	0.41 mm/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Possible use	88 m/min	0.41 mm/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Possible use	70 m/min	0.41 mm/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Possible use	96 m/min	0.41 mm/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Possible use	73 m/min	0.41 mm/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Possible use	59 m/min	0.41 mm/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Possible use	89 m/min	0.41 mm/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Possible use	67 m/min	0.41 mm/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Possible use	49 m/min	0.41 mm/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Possible use	42 m/min	0.41 mm/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Possible use	35 m/min	0.41 mm/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Possible use	100 m/min	0.41 mm/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Possible use	76 m/min	0.41 mm/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Possible use	58 m/min	0.41 mm/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

S1

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.1 - Titanium or titanium alloys, with a hardness of <200HB	help_outline Possible use	45 m/min	0.215 mm/rev
S1.2 - Titanium alloys, with a hardness of 200 - 280HB	help_outline Possible use	35 m/min	0.215 mm/rev
S1.3 - Titanium alloys, a hardness of 280 - 360HB	help_outline Possible use	30 m/min	0.175 mm/rev

S2

S2 - Fe-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S2.1 - High-temperature Fe-based alloys with a hardness of <200HB	help_outline Possible use	40 m/min	0.175 mm/rev
S2.2 - High-temperature Fe-based alloys with a hardness of 200-280HB	help_outline Possible use	35 m/min	0.175 mm/rev

S3

S3 - Ni-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S3.1 - High-temperature Ni-based alloys with a hardness of <280HB	help_outline Possible use	30 m/min	0.175 mm/rev
S3.2 - High-temperature Ni-based alloys with a hardness of 280 - 360HB	help_outline Possible use	25 m/min	0.175 mm/rev

S4

S4 - Co-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S4.1 - High-temperature Co-based alloys with a hardness of <240HB	help_outline Possible use	23 m/min	0.175 mm/rev
S4.2 - High-temperature Co-based alloys with a hardness of 240 - 320HB	help_outline Possible use	20 m/min	0.175 mm/rev

Related Parts

Tool for exchangeable head

Downloads

R9601_1-32_5988908_2D

dxf

Download

R9601_1-32_5988908_3D

stp

Download

R9601.1/32

Product Feature

Product Detail

Cutting Conditions

P1

P2

M1

M2

M3

M4

K1

K2

K3

K4

K5

S1

S2

S3

S4

Related Parts

H853

H855

H858

H851

Downloads