CCGT 120404F-AL:HF7
Turning Insert - Positive
Material ID: 6751703
Single-sided positive turning insert, 80° rhomboid with 7° clearance, inscribed circle diameter of 12.7mm, 4.76mm thick, 0.4mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602870698 |
| Product number (SAP) | 80001662 |
| Ordering code ANSI | CCGT 431F-AL:HF7 |
| Gross weight - grams | 9.691 |
| Inscribed circle diameter - millimeter (IC) | 12.7 mm |
| Fixing hole diameter - millimeter (D1) | 5.5 mm |
| Cutting edge length - millimeter (L) | 12.9 mm |
| Insert thickness - millimeter (S) | 4.76 mm |
| Grade | HF7 |
| Corner radius - millimeter (RE) | 0.4 mm |
| Insert Clearance Code and Angle | C 7° |
| Insert Design | CCGT |
| Insert size | 12 |
| Insert Thickness | 04 |
| Insert Type | T |
| Chipbreaker manufacturer's designation (CBMD) | AL |
| Insert shape code (SC) | C - rhombic 80° included angle |
| Tool Design | CC |
| Insert Geometry | Positive |
| ISO | CCGT120404F-AL:HF7 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.4 - 7 mm | 135 - 525 m/min | 0.1 - 0.312 mm/rev |