Finishing – very good surface quality - Primary use
S20S-SWLCR 06
Boring Bar ISO S - Right Hand
Material ID: 6756825
Screw clamp boring bar for holding a 80° trigon positive insert with an inscribed circle diameter of 9.525mm, 3.97mm thick (ISO designation WC.. 06T3.. ), right hand 95° side and end cutting with off-set shank, steel without coolant hole, 20mm diameter x 250mm long for taper boring and longitudinal boring with and without shoulder
Product Feature
Medium machining – good surface quality - Primary use
Roughing – unlimited surface roughness - Primary use
Heavy working conditions
Suitable for unstable working conditions - Primary use
Suitable for stable working conditions - Primary use
S – Screw clamp
Right Hand Rotation / Cutting
Product Operation
Chamfering (bevelling) in hole - Possible use
Cone turning – internal - Primary use
Longitudinal turning with shoulder – internal - Primary use
Longitudinal turning without shoulder – internal - Primary use
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602921918 |
| Product number (SAP) | 84001172 |
| Ordering code ANSI | S20S-SWLCR 06 |
| Gross weight - grams | 602.2 |
| Connection diameter - millimeter (DCON MS) | 20 mm |
| Minimum bore diameter - millimeter (DMIN) | 25 mm |
| Functional width - millimeter (WF) | 13 mm |
| Shank height - millimeter (H) | 18 mm |
| Shank width - millimeter (B) | 18.5 mm |
| Functional length - millimeter (LF) | 250 mm |
| Inclination angle (LAMS) | -7 |
| Orthogonal rake angle (GAMO) | 0 |
| Net weight - grams | 602.2 |
| Insert size | 06 |
| ISO | S20S-SWLCR06 |