Finishing – very good surface quality - Primary use
DDJNL 2525 M 15
Turning Toolholder ISO D
Material ID: 6757937
Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1506.. ), left hand 93° side cutting with off-set shank, 25mm tool height x 25mm width x 150mm long for taper turning, single and multi-directional copy turning and longitudinal turning with and without shoulder
Product Feature
Medium machining – good surface quality - Primary use
Roughing – unlimited surface roughness - Possible use
Suitable for very unstable working conditions - Possible use
Suitable for unstable working conditions - Primary use
Suitable for stable working conditions - Primary use
System D
Left Hand Rotation / Cutting
Product Operation
Chamfering (bevelling) - Possible use
Cone turning – external - Primary use
Multi directional copy turning – external - Primary use
One directional copy turning – external - Primary use
Longitudinal turning with shoulder – external - Primary use
Longitudinal turning without shoulder – external - Primary use
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602932938 |
| Product number (SAP) | 84003714 |
| Ordering code ANSI | DDJNL 2525 M 15 |
| Gross weight - grams | 746.3 |
| Shank height - millimeter (H) | 25 mm |
| Shank width - millimeter (B) | 25 mm |
| Functional height - millimeter (HF) | 25 mm |
| Functional width - millimeter (WF) | 32 mm |
| Functional length - millimeter (LF) | 150 mm |
| Head length - millimeter (LH) | 39.4 mm |
| Inclination angle (LAMS) | -7 |
| Orthogonal rake angle (GAMO) | -6 |
| Net weight - grams | 743.5 |
| Insert size | 15 |
| ISO | DDJNL2525M15 |