2×D Usable Tool Depth to Diameter Ratio
802D-23-46-S25
Indexable Drill 2 x D
Material ID: 6820772
Indexable insert drill which utilises an XPET 0703.. insert in the central pocket and a SCET 0703.. insert in the peripheral pocket, cutting diameter 23mm in combination with EP253253, suited for a radial adjustment of -0.35 to +0.50mm, with a 25mm cylindrical shank with flat according to ISO 9766 and through coolant for maximum drilling depths up to 2 x D
Product Feature
1 effective tooth per revolution
Universal shank
Through Tool Coolant
Monoblock design
Possibility of use for eccentric machining
S – Screw clamp
Product Operation
Blind hole drilling - Primary use
Through hole drilling - Primary use
Boring - Possible use
Drilling across an existing hole - Possible use
Drilling onto curved surface - Possible use
Drilling onto inclined surface - Possible use
Drill exit on inclined surface - Possible use
Welded joint drilling - Possible use
Drilling of stacked materials - Possible use
Helical interpolation drilling - Possible use
Helical interpolation boring - Possible use
Chamfering (beveling) - Possible use
Blind hole boring - Possible use
Through hole boring - Possible use
Boring through cross holes - Possible use
Boring up to a shoulder - Possible use
Interrupted cut - Possible use
Product Detail
Description | Value |
|---|---|
| EAN number | 3603603005099 |
| Product number (SAP) | 86022329 |
| Ordering code ANSI | 802D-23-46-S25 |
| Gross weight - grams | 388.3 |
| Cutting diameter - millimeter (DC) | 23 mm |
| Depth of cut maximum - millimeter (APMX) | 46 mm |
| Overall length - millimeter (OAL) | 137 mm |
| Protruding length - millimeter (LPR) | 81 mm |
| Shank length - millimeter (LS) | 56 mm |
| Usable Length - millimeter (LU) | 54.5 mm |
| Connection diameter - millimeter (DCON MS) | 25 mm |
| Flange diameter - millimeter (DF) | 35 mm |
| Adjustment limit minimum - millimeter (ADJLN) | 0.35 mm |
| Adjustment limit maximum - millimeter (ADJLX) | 0.5 mm |
| Adjustment Sleeve Code | EP253253 |
| Net weight - grams | 360 |
| ISO | 802D-23-46-S25 |