Description

Copy face mill with positve/negative geometry which utilises 7 of OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 92.6mm with 45 / 90° approach angle and 32mm connection bore according to DIN 8030-A, 50mm protrusion length, through coolant and differential pitch for face milling, copy milling, shallow shoulder milling, shallow slot milling, ramping, helical milling, plunge milling, progressive plunge milling and chamfering with a maximum depth of cut of 3.0 (6.0/10.0)mm

Product Feature

Finishing – very good surface quality - Possible use

Medium machining – good surface quality - Primary use

Roughing – unlimited surface roughness - Possible use

Suitable for very unstable working conditions - Possible use

Suitable for unstable working conditions - Primary use

Suitable for stable working conditions - Primary use

S – Screw clamp

Shell mill DIN 8030

Show all

Product Operation

Face Milling - Primary use

Shallow Shoulder Milling - Primary use

Plunge Milling - Primary use

Shallow Slot Milling - Primary use

Chamfer Milling - Primary use

Contoured Surfaces (Copy Milling) - Primary use

Ramping - Primary use

Progressive Plunging - Primary use

Show all