Finishing – very good surface quality - Primary use
C4-DWLNL-27050-06
Turning Toolholder Polygon Shank Coupling ISO D - External
Material ID: 7809818
Double clamp turning tool for holding a 80° trigon negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation WN.. 0604.. ), left hand 95° side and end cutting with off-set shank according to ISO 26623 (Polygon Shank Coupling) size C4, with 27mm funtional width and 50mm protruding length for taper turning, face turning with and without shoulder and longitudinal turning with and without shoulder
Product Feature
Medium machining – good surface quality - Primary use
Roughing – unlimited surface roughness - Possible use
Suitable for very unstable working conditions - Possible use
Suitable for unstable working conditions - Primary use
Suitable for stable working conditions - Primary use
System D
Left Hand Rotation / Cutting
Product Operation
Chamfering (bevelling) - Possible use
Cone turning – external - Primary use
Longitudinal turning with shoulder – external - Primary use
Longitudinal turning without shoulder – external - Primary use
Face turning with shoulder - Primary use
Face turning without shoulder - Primary use
Product Detail
Description | Value |
|---|---|
| EAN number | 3603603682979 |
| Product number (SAP) | 86036334 |
| Ordering code ANSI | C4-DWLNL-27050-06 |
| Gross weight - grams | 427 |
| Connection diameter - millimeter (DCON MS) | 40 mm |
| Minimum bore diameter - millimeter (DMIN) | 60 mm |
| Minimum bore diameter Perpendicular - millimeter (DMINP) | 140 mm |
| Functional width - millimeter (WF) | 27 mm |
| Functional length - millimeter (LF) | 50 mm |
| Tool cutting edge angle (KAPR) | 95 |
| Inclination angle (LAMS) | -6 |
| Orthogonal rake angle (GAMO) | -6 |
| Net weight - grams | 427 |
| Insert size | 06 |
| ISO | C4-DWLNL-27050-06 |