Finishing – very good surface quality - Primary use
C4-DDUNR-17090-11
Turning Toolholder Polygon Shank Coupling ISO D - Internal
Material ID: 7809869
Double clamp boring bar for holding a 55° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation DN.. 1104.. ), right hand 93° end cutting with off-set shank according to ISO 26623 (Polygon Shank Coupling) size C4, with 17mm funtional width and 90mm protruding length for internal chamfering, taper boring, single and multi-directional copy boring and longitudinal boring with and without shoulder
Product Feature
Medium machining – good surface quality - Primary use
Roughing – unlimited surface roughness - Possible use
Suitable for very unstable working conditions - Possible use
Suitable for unstable working conditions - Primary use
Suitable for stable working conditions - Primary use
System D
Right Hand Rotation / Cutting
Product Operation
One directional copy turning – external - Primary use
Chamfering (bevelling) from the back - Possible use
Chamfering (bevelling) in hole - Primary use
Cone turning – internal - Primary use
Longitudinal turning with shoulder – internal - Primary use
Longitudinal turning without shoulder – internal - Primary use
Multi directional copy turning – internal - Primary use
Product Detail
Description | Value |
|---|---|
| EAN number | 3603603684485 |
| Product number (SAP) | 86036385 |
| Ordering code ANSI | C4-DDUNR-17090-11 |
| Gross weight - grams | 523.5 |
| Connection diameter - millimeter (DCON MS) | 40 mm |
| Minimum bore diameter - millimeter (DMIN) | 32 mm |
| Functional width - millimeter (WF) | 17 mm |
| Functional length - millimeter (LF) | 90 mm |
| Usable Length - millimeter (LU) | 68 mm |
| Body diameter - millimeter (BD) | 25 mm |
| Tool cutting edge angle (KAPR) | 93 |
| Inclination angle (LAMS) | -12 |
| Orthogonal rake angle (GAMO) | -6 |
| Net weight - grams | 511 |
| Insert size | 11 |
| ISO | C4-DDUNR-17090-11 |