Finishing – very good surface quality - Primary use
C4-SCLCR-11070-09
Turning Toolholder Polygon Shank Coupling ISO S - Internal
Material ID: 7809878
Screw clamp boring bar for holding a 80° rhombus positive insert with an inscribed circle diameter of 9.525mm, 3.97mm thick (ISO designation CC.. 09T3.. ), right hand 95° side and end cutting with off-set shank according to ISO 26623 (Polygon Shank Coupling) size C4, with 11mm funtional width and 70mm protruding length for taper boring and longitudinal boring with and without shoulder
Product Feature
Medium machining – good surface quality - Primary use
Roughing – unlimited surface roughness - Primary use
Suitable for very unstable working conditions - Possible use
Suitable for unstable working conditions - Primary use
Suitable for stable working conditions - Primary use
S – Screw clamp
Right Hand Rotation / Cutting
Product Operation
Chamfering (bevelling) in hole - Possible use
Cone turning – internal - Primary use
Longitudinal turning with shoulder – internal - Primary use
Longitudinal turning without shoulder – internal - Primary use
Product Detail
Description | Value |
|---|---|
| EAN number | 3603603684577 |
| Product number (SAP) | 86036394 |
| Ordering code ANSI | C4-SCLCR-11070-09 |
| Gross weight - grams | 358 |
| Connection diameter - millimeter (DCON MS) | 40 mm |
| Minimum bore diameter - millimeter (DMIN) | 20 mm |
| Functional width - millimeter (WF) | 11 mm |
| Functional length - millimeter (LF) | 70 mm |
| Usable Length - millimeter (LU) | 47 mm |
| Body diameter - millimeter (BD) | 16 mm |
| Tool cutting edge angle (KAPR) | 95 |
| Inclination angle (LAMS) | -8.4 |
| Orthogonal rake angle (GAMO) | 0 |
| Net weight - grams | 358 |
| Insert size | 09 |
| ISO | C4-SCLCR-11070-09 |