GL2-D200M02-GM:G8330
Double sided Grooving and Turning insert
Material ID: 8023038
Double ended parting and grooving insert, 25 mm long with a 2mm cutting width and 0.2mm corner radii, a cutting width tolerance of ±0.05. Grade G8330 PVD coated fine grained WC-Co carbide within ISO-grade ranges P25-P40/M20-M35 and K20-K40 for machining of steel, stainless-steel and cast-iron. GM versatile geometry for grooving and longitudinal turning, and continuous to interrupted cuts.
Product Detail
Description | Value |
---|---|
EAN number | 3603603844940 |
Product number (SAP) | 80033577 |
Ordering code ANSI | GL2-D200M02-GM:G8330 |
Gross weight - grams | 5.13 |
Cutting width - millimeter (CW) | 2 mm |
Cutting width lower tolerance - millimeter (CWTOLL) | -0.05 mm |
Cutting width upper tolerance - millimeter (CWTOLU) | 0.05 mm |
Insert length - millimeter (INSL) | 25 mm |
Grade | G8330 |
Corner radius - millimeter (RE) | 0.2 mm |
Insert Design | GL. D |
Chipbreaker manufacturer's designation (CBMD) | GM |
Primary Tool Lead Angle | Neutral |
ISO | GL2-D200M02-GM:G8330 |
Pocket Size | 2 |
Features & benefits
- Double edge insert for general grooving and turning.
- Double edge insert for general grooving and turning.
- First choice for longitudinal turning and grooving,
- First choice for longitudinal turning and grooving,
- Geometry with positive T-land for prolonged tool life due to low cutting forces and reduced risk of build-up edge.
- Geometry with positive T-land for prolonged tool life due to low cutting forces and reduced risk of build-up edge.
- WC-Co based substrate submicron grained, provides high hardness and abrasive wear resistance, resistance against comb cracks
- WC-Co based substrate submicron grained, provides high hardness and abrasive wear resistance, resistance against comb cracks
- PVD coating, enhances thermal cracking resistance and performance in operations involving cutting temperature fluctuations
- PVD coating, enhances thermal cracking resistance and performance in operations involving cutting temperature fluctuations
- AlTiN layers, offers superior oxidation resistance, hot hardness and optimal crater wear resistance increasing productivity and/or tool life (durability)
- AlTiN layers, offers superior oxidation resistance, hot hardness and optimal crater wear resistance increasing productivity and/or tool life (durability)
- TiN top layer, offers easy wear recognition, reduces build up edge
- TiN top layer, offers easy wear recognition, reduces build up edge
- Grade with balanced hardness and toughness, provides the basis for versatile and productive machining combining high cutting speeds and feed rates
- Grade with balanced hardness and toughness, provides the basis for versatile and productive machining combining high cutting speeds and feed rates
Cutting Conditions
Suitability | ap | vc | f | |
---|---|---|---|---|
Primary use | 0.2 - 2 mm | 135 - 210 m/min | 0.08 - 0.25 mm/rev |
Suitability | ap | vc | f | |
---|---|---|---|---|
Primary use | 0.2 - 2 mm | 80 - 125 m/min | 0.09 - 0.23 mm/rev |
Suitability | ap | vc | f | |
---|---|---|---|---|
Primary use | 0.2 - 2 mm | 125 - 195 m/min | 0.08 - 0.25 mm/rev |
Suitability | ap | vc | f | |
---|---|---|---|---|
Possible use | 0.2 - 1.6 mm | 25 - 60 m/min | 0.08 - 0.2 mm/rev |