Titanium Silicon Nitride Coating
Corner Radius End Mill
Material ID: 6706733
Short series corner radius end mill with 4 flutes, diameter 4mm with 12mm length of cut, 50mm overall length and 0.3mm corner radii, according to DORMER standard with a 6mm plain shank, solid carbide with TiSiN coating, 40° helix and -6° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in hardened materials
Hard Material (Solid Carbide)
General Purpose Cutter Type for Low to High Resistance Materials
Cut Length, Short
40° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
Radial, Diagonal
Dormer Standards
Number of Flutes = 4 (teeth)
Face Milling - Possible use
Shallow Shoulder Milling - Primary use
Deep Shoulder Milling - Primary use
Plunge Milling - Primary use
Shallow Slot Milling - Possible use
Contoured Surfaces (Copy Milling) - Possible use
Ramping - Primary use
Progressive Plunging - Primary use
Helical Interpolation - Primary use
Trochoidal Milling - Primary use
| EAN number | 7320760682821 |
| Product number (SAP) | 86021870 |
| Ordering code ANSI | S5234.0XR0.3XD6 |
| Gross weight - grams | 22 |
| Cutting diameter - millimeter (DC) | 4 mm |
| Corner radius - millimeter (RE) | 0.3 mm |
| Connection diameter - millimeter (DCON MS) | 6 mm |
| Depth of cut maximum - millimeter (APMX) | 12 mm |
| Overall length - millimeter (OAL) | 50 mm |
| Flute count (NOF) | 4 |
| Radial rake angle (GAMF) | -6 |
| ISO | S5234.0XR0.3XD6 |