Titanium Silicon Nitride Coating
End Mill
Material ID: 8030375
Regular length End mill with 4 flutes, diameter 4mm with 12mm length of cut and 50mm overall length, according to DORMER standard with a 6mm plain shank, solid carbide with TiSiN coating, 40° helix and -6° rake angle for shoulder milling, plunging, ramping, progressive plunge milling and helical milling in hardened materials
Hard Material (Solid Carbide)
General Purpose Cutter Type for Low to High Resistance Materials
Cut Length, Medium
40° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
Radial, Diagonal, Axial
Dormer Standards
Number of Flutes = 4 (teeth) differential pitch
Shallow Shoulder Milling - Primary use
Deep Shoulder Milling - Primary use
Plunge Milling - Primary use
Shallow Slot Milling - Possible use
Ramping - Primary use
Progressive Plunging - Primary use
Helical Interpolation - Primary use
| EAN number | 7320760950951 |
| Product number (SAP) | 86038200 |
| Ordering code ANSI | S5614.0 |
| Gross weight - grams | 22.9 |
| Cutting diameter - millimeter (DC) | 4 mm |
| Connection diameter - millimeter (DCON MS) | 6 mm |
| Depth of cut maximum - millimeter (APMX) | 12 mm |
| Overall length - millimeter (OAL) | 50 mm |
| Flute count (NOF) | 4 |
| Radial rake angle (GAMF) | -6 |
| ISO | S5614.0 |
- Titanium Silicon Nitride coating for longer tool life, enabling higher cutting speeds and increased heat resistance, making them ideal for dry machining.
- Micrograin Carbide providing extreme hardness and wear resistance providing increased tool life when machining difficult materials
- The four-flute end mill feature a specific tooth design for improved chip evacuation.
- A differential pitch design provides chatter free machining and an excellent surface finish.
- Robust cutting geometry due to negative rake angle.
- A sharp cutter for hardened steel (52-70HRC), providing excellent finishing in die and mold applications.
- Cutting edge preparation for excellent surface finish.
- Gash land design to improve strength and better chipping resistance.
S5614_0_8030375_2D.dxf
S5614_0_8030375_3D.stp