Steam Tempered (Steam Oxide) Surface Treatment
M Machine Tap Spiral Point, Blue Shark
Material ID: 6305829
Spiral point tap Blue Shark with chamfer form B with a 3.5-5xP second lead, for ISO-Metric thread M24 with 3.00 mm pitch and 6H class of fit, dimensions according to DIN 376 standard with 18.0mm shank and 14.5mm square drive, powder metallurgical HSS-E with steam tempered surface finish for 2.5xD through hole threading in stainless steel
Thread Form, Metric Coarse
DIN 376 – Thread Form Standard
DIN Thread Pitch Diameter Tolerance Zone (high basic pitch diameter)
Through Hole Application
2.5×D Usable Tool Depth to Diameter Ratio
High Speed Cobalt Powder Metal Tool Material
Plug Tap Chamfer (3.5 – 5 Pitch Lead)
Spiral Point Geometry
Right Hand Rotation / Cutting
| Product name | E240M24 |
| Product number (SAP) | 86015736 |
| EAN number | 7320760664346 |
| Ordering code ANSI | E240M24 |
| Product Line | SHARK |
| Thread diameter size (TDZ) | 24 |
| Thread pitch - millimeter (TP) | 3 mm |
| Overall length - millimeter (OAL) | 160 mm |
| Overall length - inch (OAL) | 6.2992 inch |
| Threading length - millimeter (THL) | 38 mm |
| Threading length - inch (THL) | 1.4961 inch |
| Connection diameter - inch (DCON MS) | 0.7087 inch |
| Connection diameter - millimeter (DCON MS) | 18 mm |
| Flute count (NOF) | 4 |
| Clamping width - inch (WSC) | 0.5709 inch |
| Clamping width - millimeter (WSC) | 14.5 mm |
| Clamping Length - inch (LCS) | 0.6693 inch |
| Clamping Length - millimeter (LSC) | 17 mm |
| Premachined hole diameter - inch (PHD) | 0.8268 inch |
| Premachined hole diameter - millimeter (PHD) | 21 mm |
| Gross weight - grams | 328.2 |
| ISO | E240M24 |
| Suitability | vc | f | |
|---|---|---|---|
| P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Possible use | 8 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| P3.3 - Alloy steel with a hardness of 260 - 360HB | Possible use | 10 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| P4.1 - Tool steel with a hardness of < 26HRC | Possible use | 9 m/min | |
| P4.2 - Tool steel with a hardness of 26 - 39RC | Possible use | 7 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Primary use | 11 m/min | |
| M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Primary use | 9 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Primary use | 10 m/min | |
| M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Primary use | 8 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| M3.1 - Stainless steel, austenitic with a hardness of < 200HB | Primary use | 8 m/min | |
| M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB | Primary use | 7 m/min | |
| M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB | Primary use | 6 m/min |
| Suitability | vc | f | |
|---|---|---|---|
| M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB | Primary use | 5 m/min |