Turning Insert - Grooving
Material ID: 7721646
Double ended circlip grooving insert, with a 3.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade G8330 PVD coated fine grained WC-Co carbide within ISO-grade ranges P25-P40 and M20-M35 for machining of steel and stainless-steel in combination with PRAMET P61.SFL, P61.GFL and GL6-S.. B parting and grooving tools
| EAN number | 3603603592643 |
| Product number (SAP) | 80031724 |
| Ordering code ANSI | X61 0602-315 L:G8330 |
| Gross weight - grams | 1.726 |
| Insert width - millimeter (W1) | 6.35 mm |
| Cutting width lower tolerance - millimeter (CWTOLL) | -0.03 mm |
| Cutting width upper tolerance - millimeter (CWTOLU) | 0.03 mm |
| Insert thickness - millimeter (S) | 2.33 mm |
| Grade | G8330 |
| Cutting width - millimeter (CW) | 3.2 mm |
| Cutting depth maximum - millimeter (CDX) | 3 mm |
| Insert Design | X 61 |
| Chipbreaker manufacturer's designation (CBMD) | With chipbreaker -no designation |
| Primary Tool Lead Angle | Neutral |
| ISO | X610602-315L:G8330 |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | - | 115 - 155 m/min | 0.04 - 0.16 mm/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | - | 65 - 90 m/min | 0.04 - 0.14 mm/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | - | 105 - 145 m/min | 0.04 - 0.16 mm/rev |
Material ID : 7725303
Material ID : 7725304
Material ID : 7725306
Material ID : 7725305
Material ID : 7725308
Material ID : 7725307
Material ID : 7725312
Material ID : 7725309
Material ID : 7725314
Material ID : 7725313
Material ID : 7725315
Material ID : 7725319
Material ID : 7725317
Material ID : 7725320
Material ID : 7725321
Material ID : 7725322