Aluminium Chromium Nitride Coating
End Mill
Material ID: 6706919
Short series end mill with 4 flutes, diameter 12mm with 26mm length of cut and 83mm overall length, according to DORMER standard with a 12mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling and plunging in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC
Hard Material (Solid Carbide)
General Purpose Cutter Type for Low to High Resistance Materials
Cut Length, Short
40° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
Radial, Diagonal, Axial
Dormer Standards
Number of Flutes = 4 (teeth) differential pitch
Shallow Shoulder Milling - Primary use
Deep Shoulder Milling - Possible use
Plunge Milling - Primary use
Shallow Slot Milling - Possible use
Ramping - Possible use
Progressive Plunging - Possible use
Helical Interpolation - Possible use
Trochoidal Milling - Primary use
| EAN number | 7320760684689 |
| Product number (SAP) | 86022054 |
| Ordering code ANSI | S26012.0 |
| Gross weight - grams | 122 |
| Cutting diameter - millimeter (DC) | 12 mm |
| Connection diameter - millimeter (DCON MS) | 12 mm |
| Depth of cut maximum - millimeter (APMX) | 26 mm |
| Overall length - millimeter (OAL) | 83 mm |
| Flute count (NOF) | 4 |
| Radial rake angle (GAMF) | 4 |
| ISO | S26012.0 |