Aluminium Chromium Nitride Coating
Corner Radius End Mill
Material ID: 6706852
Short series corner radius end mill with 4 flutes, diameter 10mm with 22mm length of cut, 70mm overall length and 0.5mm corner radii, according to DORMER standard with a 10mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 10° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in steel and cast steel, ferritic, martensitic and austenitic stainless steel, cast-iron and high-temperature alloys
Hard Material (Solid Carbide)
General Purpose Cutter Type for Low to High Resistance Materials
Cut Length, Short
40° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
Radial, Diagonal, Axial
Dormer Standards
Number of Flutes = 4 (teeth) differential pitch
Face Milling - Possible use
Shallow Shoulder Milling - Primary use
Deep Shoulder Milling - Possible use
Plunge Milling - Primary use
Shallow Slot Milling - Possible use
Ramping - Primary use
Progressive Plunging - Primary use
Helical Interpolation - Primary use
Trochoidal Milling - Possible use
| EAN number | 7320760684016 |
| Product number (SAP) | 86021987 |
| Ordering code ANSI | S76310.0XR0.5 |
| Gross weight - grams | 73 |
| Cutting diameter - millimeter (DC) | 10 mm |
| Corner radius - millimeter (RE) | 0.5 mm |
| Connection diameter - millimeter (DCON MS) | 10 mm |
| Depth of cut maximum - millimeter (APMX) | 22 mm |
| Overall length - millimeter (OAL) | 70 mm |
| Flute count (NOF) | 4 |
| Radial rake angle (GAMF) | 10 |
| ISO | S76310.0XR0.5 |