Aluminium Chromium Nitride Coating
Slot Drill
Material ID: 5983601
Short series slot drill with 3 flutes, diameter 10mm with 19mm length of cut, 72mm overall length and 0.2mm 45° chamfered corner edges, according to DIN 6527 L standard with a 10mm plain shank, solid carbide with AlCrN coating, 28° helix and 9° rake angle for shoulder milling, plunging, slot milling and ramping in steel and cast steel, ferritic and martensitic stainless steel, cast-iron and cast aluminium and copper or copper alloys
Hard Material (Solid Carbide)
General Purpose Cutter Type for Low to High Resistance Materials
Cut Length, Short
28° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
Radial, Diagonal, Axial
DIN 6527 L – Carbide End Mill Standards
Number of Flutes = 3 (teeth)
Shallow Shoulder Milling - Primary use
Deep Shoulder Milling - Possible use
Plunge Milling - Primary use
Shallow Slot Milling - Primary use
Deep Slot Milling - Possible use
Ramping - Primary use
Helical Interpolation - Possible use
Drilling - Possible use
P9 Slotting (Keyway) - Primary use
| EAN number | 7320760642276 |
| Product number (SAP) | 86020216 |
| Ordering code ANSI | S813HA10.0 |
| Gross weight - grams | 75.7 |
| Cutting diameter - millimeter (DC) | 10 mm |
| Corner chamfer width - millimeter (CHW) | 0.2 mm |
| Connection diameter - millimeter (DCON MS) | 10 mm |
| Depth of cut maximum - millimeter (APMX) | 19 mm |
| Overall length - millimeter (OAL) | 72 mm |
| Flute count (NOF) | 3 |
| Radial rake angle (GAMF) | 9 |
| ISO | S813HA10.0 |
S813HA10_0_5983601_2D.dxf
S813HA10_0_5983601_3D.stp