Bright (uncoated)
Ball-Nosed End Mill
Material ID: 6706538
Extra short series ball-nose end mill with 2 flutes, diameter 20mm with 22mm length of cut, 100mm overall length, 50mm reach with neck relief and 10mm full profile radius, according to DORMER standard with a 20mm plain shank, solid carbide with polished finish, 30° helix and 15° rake angle for copy milling in non-ferrous metals
Hard Material (Solid Carbide)
Non-ferrous Cutter Type for Soft Malleable Materials
Cut Length, Extra Short
30° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
Radial, Diagonal, Axial
Dormer Standards
Number of Flutes = 2 (teeth)
Contoured Surfaces (Copy Milling) - Primary use
| EAN number | 7320760680872 |
| Product number (SAP) | 86021678 |
| Ordering code ANSI | S62920.0 |
| Gross weight - grams | 380 |
| Cutting diameter - millimeter (DC) | 20 mm |
| Corner radius - millimeter (RE) | 10 mm |
| Connection diameter - millimeter (DCON MS) | 20 mm |
| Depth of cut maximum - millimeter (APMX) | 22 mm |
| Overall length - millimeter (OAL) | 100 mm |
| Flute count (NOF) | 2 |
| Usable Length - millimeter (LU) | 50 mm |
| Neck diameter - millimeter (DN) | 19 mm |
| Radial rake angle (GAMF) | 15 |
| With Neck | Yes |
| ISO | S62920.0 |
- Full radius ball end geometry to enable the machining of complex contours and surfaces
- Micrograin Carbide providing extreme hardness and wear resistance providing increased tool life when machining difficult materials
- Ground polished finish to prevent work material from sticking to the the cutting edges
- Specific geometry designed for slot milling and ramping