A13012.0
Taper Shank Drill
Ordering number: 5969037
Jobber length drill with taper shank, diameter 12mm with an overall length of 182mm and flute length of 101mm according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered finish for 4xD drilling without pecking in steel
Product Feature
Product Detail
Description | Value |
---|---|
EAN number | 7320760022368 |
EDP number | 0022368 |
Product name | A13012.0 |
Ordering code ANSI | A13012.0 |
Gross weight - grams | 112.8 |
Cutting diameter - millimeter (DC) | 12 mm |
Cutting diameter - inch (DC) | 0.4724 inch |
Length chip flute - millimeter (LCF) | 101 mm |
Overall length - millimeter (OAL) | 182 mm |
Connection size code machine side (CZC MS) | MK 1 |
Length chip flute - inch (LCF) | 3.9764 inch |
ANSI | A13012.0 |
ISO | A13012.0 |
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 108 ft/min | 0.011 inch/rev |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 121 ft/min | 0.011 inch/rev |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 125 ft/min | 0.011 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 92 ft/min | 0.011 inch/rev |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Primary use | 82 ft/min | 0.007 inch/rev |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Possible use | 72 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 59 ft/min | 0.007 inch/rev |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Primary use | 46 ft/min | 0.007 inch/rev |
P3.3 - Alloy steel with a hardness of 260 - 360HB | Possible use | 39 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Primary use | 36 ft/min | 0.007 inch/rev |
P4.2 - Tool steel with a hardness of 26 - 39RC | Possible use | 30 ft/min | 0.0059 inch/rev |
P4.3 - Tool steel with a hardness of 39 - 45HRC | Possible use | 23 ft/min | 0.0051 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Possible use | 69 ft/min | 0.0059 inch/rev |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Possible use | 56 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Possible use | 59 ft/min | 0.0059 inch/rev |
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Possible use | 49 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M3.1 - Stainless steel, austenitic with a hardness of < 200HB | Possible use | 33 ft/min | 0.0081 inch/rev |
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB | Possible use | 30 ft/min | 0.0081 inch/rev |
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB | Possible use | 26 ft/min | 0.0081 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB | Possible use | 33 ft/min | 0.0043 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Primary use | 98 ft/min | 0.011 inch/rev |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Primary use | 72 ft/min | 0.0059 inch/rev |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Primary use | 56 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Possible use | 82 ft/min | 0.0059 inch/rev |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Possible use | 66 ft/min | 0.0059 inch/rev |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Possible use | 52 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Possible use | 72 ft/min | 0.0059 inch/rev |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Possible use | 56 ft/min | 0.0059 inch/rev |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Possible use | 43 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Possible use | 66 ft/min | 0.0059 inch/rev |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Possible use | 49 ft/min | 0.0059 inch/rev |
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB | Possible use | 36 ft/min | 0.0059 inch/rev |
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB | Possible use | 33 ft/min | 0.0059 inch/rev |
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB | Possible use | 26 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Possible use | 75 ft/min | 0.0059 inch/rev |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Possible use | 56 ft/min | 0.0059 inch/rev |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Possible use | 43 ft/min | 0.0059 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Possible use | 85 ft/min | 0.0124 inch/rev |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Possible use | 66 ft/min | 0.0124 inch/rev |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Possible use | 43 ft/min | 0.011 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Possible use | 141 ft/min | 0.0096 inch/rev |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Possible use | 128 ft/min | 0.0096 inch/rev |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Possible use | 92 ft/min | 0.0096 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Possible use | 194 ft/min | 0.0096 inch/rev |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Possible use | 115 ft/min | 0.011 inch/rev |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Possible use | 59 ft/min | 0.007 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N4.1 - Thermoplastic polymers | Possible use | 98 ft/min | 0.0138 inch/rev |
N4.2 - Thermosetting polymers | Possible use | 92 ft/min | 0.0124 inch/rev |
N4.3 - Reinforced polymers or composites | Possible use | 46 ft/min | 0.0096 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S1.1 - Titanium or titanium alloys, with a hardness of <200HB | Possible use | 75 ft/min | 0.007 inch/rev |
S1.2 - Titanium alloys, with a hardness of 200 - 280HB | Possible use | 43 ft/min | 0.0051 inch/rev |
S1.3 - Titanium alloys, a hardness of 280 - 360HB | Possible use | 23 ft/min | 0.0035 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S2.1 - High-temperature Fe-based alloys with a hardness of <200HB | Possible use | 30 ft/min | 0.0059 inch/rev |
S2.2 - High-temperature Fe-based alloys with a hardness of 200-280HB | Possible use | 20 ft/min | 0.0027 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S3.1 - High-temperature Ni-based alloys with a hardness of <280HB | Possible use | 23 ft/min | 0.0059 inch/rev |
S3.2 - High-temperature Ni-based alloys with a hardness of 280 - 360HB | Possible use | 13 ft/min | 0.0027 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S4.1 - High-temperature Co-based alloys with a hardness of <240HB | Possible use | 16 ft/min | 0.0059 inch/rev |
S4.2 - High-temperature Co-based alloys with a hardness of 240 - 320HB | Possible use | 10 ft/min | 0.0027 inch/rev |