G13863.0

Morse Taper Shank Countersink - 90°
Ordering number: 5973076

Countersink with 3-flutes, 90° chamfering angle, maximum diameter 63.00mm with an overall length of 180mm and a head length of 28.5mm and MT 4 Morse-taper shank, according to DIN 335 D standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 16.00mm, HSS with standard bright finish for machining free machining and plain carbon steel, copper or copper alloys

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Bright (uncoated)

High Speed Steel Tool Material

DIN 335 D – Morse Taper Shank Countersink Standards

Right Hand Rotation / Cutting

90° Countersink

Morse Taper Shank

Product Detail

Description	Value
EAN number	7320760108987
EDP number	0108987
Product name	G13863.0
Ordering code ANSI	G13863.0
Gross weight - grams	1137
Cutting diameter second cutting step - millimeters (DC_2)	63 mm
Cutting diameter step - millimeter	16 mm
Length chip flute - millimeter (LCF)	28.5 mm
Overall length - millimeter (OAL)	180 mm
Connection size code machine side (CZC MS)	MK 4
Flute count (NOF)	3
ANSI	G13863.0
ISO	G13863.0

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	75 ft/min	0.0126 inch/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	85 ft/min	0.0126 inch/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	89 ft/min	0.0126 inch/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	66 ft/min	0.0126 inch/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	59 ft/min	0.011 inch/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Possible use	52 ft/min	0.0079 inch/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	52 ft/min	0.011 inch/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Possible use	43 ft/min	0.011 inch/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Possible use	36 ft/min	0.0079 inch/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Primary use	33 ft/min	0.011 inch/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Possible use	26 ft/min	0.0079 inch/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Possible use	26 ft/min	0.0087 inch/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Possible use	20 ft/min	0.0087 inch/rev

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Possible use	23 ft/min	0.0087 inch/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Possible use	20 ft/min	0.0087 inch/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Possible use	66 ft/min	0.0142 inch/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Possible use	49 ft/min	0.011 inch/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Possible use	69 ft/min	0.0087 inch/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Possible use	56 ft/min	0.0087 inch/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Possible use	59 ft/min	0.0087 inch/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Possible use	46 ft/min	0.0087 inch/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Possible use	62 ft/min	0.0087 inch/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Possible use	49 ft/min	0.0087 inch/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Possible use	131 ft/min	0.0157 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Primary use	98 ft/min	0.0157 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Possible use	66 ft/min	0.0142 inch/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Primary use	66 ft/min	0.0142 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Possible use	59 ft/min	0.0142 inch/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	69 ft/min	0.0142 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	39 ft/min	0.0142 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Possible use	20 ft/min	0.011 inch/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Possible use	131 ft/min	0.0157 inch/rev
N4.2 - Thermosetting polymers	help_outline Possible use	115 ft/min	0.0157 inch/rev

Related Parts

Used as replacement

Material application

Select

G13863.0

Product Feature

Product Detail

Cutting Conditions

P1

P2

P3

P4

M1

M2

K1

K2

K3

K5

N1

N2

N3

N4

Related Parts

G338