E513M20X2.0NO7
HSS Straight Flute Hand Tap, Metric Fine, ISO Standard
Ordering number: 5977341
Set of straight flute hand taps NO7 for ISO-Metric Fine thread M20 with 2.00 mm pitch and 6H class of fit, consisting of 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 14.0mm shank and 11.2mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel and copper or copper alloys
Product Feature
Product Detail
Description | Value |
---|---|
Product name | E513M20X2.0NO7 |
EDP number | 0155455 |
EAN number | 7320760155455 |
Thread diameter size (TDZ) | 20 |
Thread pitch - millimeter (TP) | 2 mm |
Overall length - millimeter (OAL) | 112 mm |
Overall length - inch (OAL) | 4.4094 inch |
Threading length - millimeter (THL) | 29 mm |
Threading length - inch (THL) | 1.1417 inch |
Connection diameter - inch (DCON MS) | 0.5512 inch |
Connection diameter - millimeter (DCON MS) | 14 mm |
Flute count (NOF) | 4 |
Clamping width - inch (WSC) | 0.4409 inch |
Clamping width - millimeter (WSC) | 11.2 mm |
Clamping Length - inch (LCS) | 0.5512 inch |
Clamping Length - millimeter (LSC) | 14 mm |
Premachined hole diameter - inch (PHD) | 0.7087 inch |
Premachined hole diameter - millimeter (PHD) | 18 mm |
Gross weight - grams | 337.4 |
ANSI | E513M20X2.0NO7 |
ISO | E513M20X2.0NO7 |
Ordering code ANSI | E513M20X2.0NO7 |
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 23 ft/min | |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 23 ft/min | |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 26 ft/min |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 20 ft/min | |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Primary use | 16 ft/min | |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Possible use | 13 ft/min |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 13 ft/min | |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Possible use | 13 ft/min |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Possible use | 10 ft/min |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Possible use | 39 ft/min | |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Possible use | 30 ft/min | |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Possible use | 23 ft/min |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Possible use | 39 ft/min | |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Possible use | 33 ft/min |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Possible use | 36 ft/min | |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Possible use | 26 ft/min |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Possible use | 33 ft/min | |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Possible use | 26 ft/min |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Possible use | 36 ft/min | |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Possible use | 30 ft/min |
Suitability | vc | f | |
---|---|---|---|
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Possible use | 26 ft/min |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Possible use | 36 ft/min | |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Possible use | 33 ft/min | |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Possible use | 23 ft/min |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 56 ft/min | |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 33 ft/min | |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Possible use | 16 ft/min |
Suitability | vc | f | |
---|---|---|---|
N4.2 - Thermosetting polymers | Possible use | 16 ft/min | |
N4.3 - Reinforced polymers or composites | Possible use | 10 ft/min |