R45319.8
Force X Drill Oil Feed 5×D
Ordering number: 5979593
High-performance FORCE X drill with DIN 6535HA NC parallel shank, diameter 19.8mm with an overall length of 153mm and flute length of 99mm according to DIN 6537 L standard with 140° modified 4-facet split point, solid carbide with TiAlN coating, continiously thinned parallel web and through coolant holes for 5xD drilling without pecking in steel, stainless steel, cast iron, non-ferrous material, super-alloy and hardened material
Product Feature
Product Detail
Description | Value |
---|---|
EAN number | 7320760134443 |
EDP number | 0134443 |
Product name | R45319.8 |
Ordering code ANSI | R45319.8 |
Product Line | FORCE X |
Gross weight - grams | 473.5 |
Cutting diameter - millimeter (DC) | 19.8 mm |
Cutting diameter - inch (DC) | 0.7795 inch |
Length chip flute - millimeter (LCF) | 99 mm |
Overall length - millimeter (OAL) | 153 mm |
Shank length - millimeter (LS) | 50 mm |
Connection diameter - millimeter (DCON MS) | 20 mm |
Length chip flute - inch (LCF) | 3.8976 inch |
ANSI | R45319.8 |
ISO | R45319.8 |
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 558 ft/min | 0.0133 inch/rev |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 623 ft/min | 0.0133 inch/rev |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 646 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 476 ft/min | 0.0133 inch/rev |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Primary use | 420 ft/min | 0.0133 inch/rev |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Primary use | 371 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 413 ft/min | 0.0133 inch/rev |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Primary use | 335 ft/min | 0.0133 inch/rev |
P3.3 - Alloy steel with a hardness of 260 - 360HB | Primary use | 282 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Primary use | 246 ft/min | 0.0133 inch/rev |
P4.2 - Tool steel with a hardness of 26 - 39RC | Primary use | 210 ft/min | 0.0133 inch/rev |
P4.3 - Tool steel with a hardness of 39 - 45HRC | Primary use | 171 ft/min | 0.0094 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Possible use | 233 ft/min | 0.0133 inch/rev |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Possible use | 200 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Possible use | 210 ft/min | 0.0133 inch/rev |
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Possible use | 171 ft/min | 0.0133 inch/rev |
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB | Possible use | 144 ft/min | 0.0094 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M3.1 - Stainless steel, austenitic with a hardness of < 200HB | Possible use | 128 ft/min | 0.0133 inch/rev |
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB | Possible use | 108 ft/min | 0.0133 inch/rev |
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB | Possible use | 98 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB | Possible use | 95 ft/min | 0.0094 inch/rev |
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB | Possible use | 82 ft/min | 0.0094 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Primary use | 344 ft/min | 0.0177 inch/rev |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Primary use | 253 ft/min | 0.0177 inch/rev |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Primary use | 190 ft/min | 0.0177 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Primary use | 305 ft/min | 0.0133 inch/rev |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Primary use | 249 ft/min | 0.0133 inch/rev |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Primary use | 200 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Primary use | 272 ft/min | 0.0133 inch/rev |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Primary use | 210 ft/min | 0.0133 inch/rev |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Primary use | 167 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Primary use | 253 ft/min | 0.0133 inch/rev |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Primary use | 190 ft/min | 0.0133 inch/rev |
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB | Primary use | 141 ft/min | 0.0133 inch/rev |
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB | Primary use | 118 ft/min | 0.0133 inch/rev |
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB | Primary use | 98 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Primary use | 282 ft/min | 0.0133 inch/rev |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Primary use | 217 ft/min | 0.0133 inch/rev |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Primary use | 164 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Primary use | 781 ft/min | 0.0177 inch/rev |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Primary use | 587 ft/min | 0.0177 inch/rev |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Primary use | 390 ft/min | 0.0177 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Primary use | 961 ft/min | 0.0133 inch/rev |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Primary use | 863 ft/min | 0.0133 inch/rev |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Primary use | 623 ft/min | 0.0133 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 1161 ft/min | 0.0177 inch/rev |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 686 ft/min | 0.0177 inch/rev |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Primary use | 344 ft/min | 0.0177 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S1.1 - Titanium or titanium alloys, with a hardness of <200HB | Primary use | 171 ft/min | 0.0133 inch/rev |
S1.2 - Titanium alloys, with a hardness of 200 - 280HB | Primary use | 141 ft/min | 0.0133 inch/rev |
S1.3 - Titanium alloys, a hardness of 280 - 360HB | Primary use | 125 ft/min | 0.0094 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H1.1 - Chilled cast iron with a hardness of <440HB | Primary use | 174 ft/min | 0.0094 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H2.1 - Hardened cast iron with a hardness <55HRC | Possible use | 102 ft/min | 0.0094 inch/rev |
H2.2 - Hardened cast iron with a hardness >55HRC | Possible use | 95 ft/min | 0.0094 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H3.1 - Hardened steel with a hardness of <51HRC | Possible use | 115 ft/min | 0.0094 inch/rev |
H3.2 - Hardened steel with a hardness of 51 - 55HRC | Possible use | 95 ft/min | 0.0094 inch/rev |