R5203.6
CDX Stub Drill
Ordering number: 5981171
High-performance CDX drill with straight shank, diameter 3.6mm with an overall length of 52mm and flute length of 20mm according to DIN 6539 standard with 130° 4-facet volute point, solid carbide with TiN coating for 2.5xD drilling without pecking in steel, cast iron and non-ferrous material
Product Feature
Product Detail
Description | Value |
---|---|
EAN number | 7320760116128 |
EDP number | 0116128 |
Product name | R5203.6 |
Ordering code ANSI | R5203.6 |
Product Line | CDX |
Gross weight - grams | 9.1 |
Cutting diameter - millimeter (DC) | 3.6 mm |
Cutting diameter - inch (DC) | 0.1417 inch |
Length chip flute - millimeter (LCF) | 20 mm |
Overall length - millimeter (OAL) | 52 mm |
Connection diameter - millimeter (DCON MS) | 3.6 mm |
Length chip flute - inch (LCF) | 0.7874 inch |
ANSI | R5203.6 |
ISO | R5203.6 |
Features & benefits
- Conventional flute geometry designed for general drilling applications
- Titanium Nitride coating increases surface hardness and wear resistance to improve tool life at accelerated cutting data
- Micrograin Carbide providing extreme hardness and wear resistance providing increased tool life when machining difficult materials
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 390 ft/min | 0.0066 inch/rev |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 440 ft/min | 0.0066 inch/rev |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 453 ft/min | 0.0066 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 335 ft/min | 0.0066 inch/rev |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Primary use | 295 ft/min | 0.0066 inch/rev |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Primary use | 262 ft/min | 0.0066 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 266 ft/min | 0.0066 inch/rev |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Primary use | 213 ft/min | 0.0066 inch/rev |
P3.3 - Alloy steel with a hardness of 260 - 360HB | Primary use | 180 ft/min | 0.0066 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Primary use | 157 ft/min | 0.0066 inch/rev |
P4.2 - Tool steel with a hardness of 26 - 39RC | Primary use | 135 ft/min | 0.0066 inch/rev |
P4.3 - Tool steel with a hardness of 39 - 45HRC | Primary use | 112 ft/min | 0.0056 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Possible use | 226 ft/min | 0.0056 inch/rev |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Possible use | 190 ft/min | 0.0056 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Possible use | 200 ft/min | 0.0056 inch/rev |
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Possible use | 164 ft/min | 0.0056 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Primary use | 295 ft/min | 0.008 inch/rev |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Primary use | 220 ft/min | 0.008 inch/rev |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Primary use | 164 ft/min | 0.008 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Primary use | 262 ft/min | 0.0066 inch/rev |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Primary use | 213 ft/min | 0.0066 inch/rev |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Primary use | 171 ft/min | 0.0066 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Primary use | 233 ft/min | 0.0066 inch/rev |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Primary use | 177 ft/min | 0.0066 inch/rev |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Primary use | 144 ft/min | 0.0066 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Primary use | 217 ft/min | 0.0066 inch/rev |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Primary use | 161 ft/min | 0.0066 inch/rev |
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB | Primary use | 118 ft/min | 0.0066 inch/rev |
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB | Primary use | 102 ft/min | 0.0066 inch/rev |
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB | Primary use | 85 ft/min | 0.0066 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Primary use | 243 ft/min | 0.0066 inch/rev |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Primary use | 184 ft/min | 0.0066 inch/rev |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Primary use | 141 ft/min | 0.0066 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Primary use | 738 ft/min | 0.0116 inch/rev |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Primary use | 554 ft/min | 0.0116 inch/rev |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Primary use | 371 ft/min | 0.0116 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Primary use | 758 ft/min | 0.008 inch/rev |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Primary use | 682 ft/min | 0.008 inch/rev |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Primary use | 492 ft/min | 0.008 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N4.1 - Thermoplastic polymers | Primary use | 246 ft/min | 0.0116 inch/rev |
N4.2 - Thermosetting polymers | Primary use | 377 ft/min | 0.0043 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S1.1 - Titanium or titanium alloys, with a hardness of <200HB | Possible use | 197 ft/min | 0.0056 inch/rev |
S1.2 - Titanium alloys, with a hardness of 200 - 280HB | Possible use | 148 ft/min | 0.0043 inch/rev |
S1.3 - Titanium alloys, a hardness of 280 - 360HB | Possible use | 115 ft/min | 0.003 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H1.1 - Chilled cast iron with a hardness of <440HB | Possible use | 213 ft/min | 0.003 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H2.1 - Hardened cast iron with a hardness <55HRC | Possible use | 125 ft/min | 0.003 inch/rev |
H2.2 - Hardened cast iron with a hardness >55HRC | Possible use | 118 ft/min | 0.0018 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H3.1 - Hardened steel with a hardness of <51HRC | Possible use | 141 ft/min | 0.003 inch/rev |
H3.2 - Hardened steel with a hardness of 51 - 55HRC | Possible use | 115 ft/min | 0.003 inch/rev |