R45821/32
Force X Drill 3×D
Ordering number: 5981197
High-performance FORCE X drill with DIN 6535HA NC parallel shank, diameter 0.6563" (21/32) with an overall length of 123mm and flute length of 73mm according to DIN 6537 K standard with 140° modified 4-facet split point, solid carbide with TiAlN coating and continiously thinned parallel web for 3xD drilling without pecking in steel, stainless steel, cast iron, non-ferrous material and hardened material
Product Feature
Product Detail
Description | Value |
---|---|
EAN number | 7320760624968 |
EDP number | 0624968 |
Product name | R45821/32 |
Ordering code ANSI | R45821/32 |
Product Line | FORCE X |
Gross weight - grams | 329 |
Cutting diameter - fractional inch (DC) | 21/32 |
Cutting diameter - millimeter (DC) | 16.67 mm |
Cutting diameter - inch (DC) | 0.6563 inch |
Length chip flute - millimeter (LCF) | 73 mm |
Overall length - millimeter (OAL) | 123 mm |
Shank length - millimeter (LS) | 48 mm |
Connection diameter - millimeter (DCON MS) | 18 mm |
Length chip flute - inch (LCF) | 2.874 inch |
ANSI | R45821/32 |
ISO | R45821/32 |
Features & benefits
- Coolant channels through the tool provide effective coolant delivery, reducing the temperature in the cutting zone and assisting chip evacuation, enabeling incresaed tool life at accelerated cutting data
- Micrograin Carbide providing extreme hardness and wear resistance providing increased tool life when machining difficult materials
- Ttanium Aluminium Nitride coating increases surface hardness and wear resistance at higher temperatures to improve tool life at accelerated cutting data
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Primary use | 469 ft/min | 0.017 inch/rev |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Primary use | 525 ft/min | 0.017 inch/rev |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Primary use | 545 ft/min | 0.017 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Primary use | 400 ft/min | 0.017 inch/rev |
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Primary use | 354 ft/min | 0.017 inch/rev |
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB | Primary use | 312 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P3.1 - Alloy steel with a hardness of < 180HB | Primary use | 348 ft/min | 0.0127 inch/rev |
P3.2 - Alloy steel with a hardness of 180 - 260HB | Primary use | 282 ft/min | 0.0127 inch/rev |
P3.3 - Alloy steel with a hardness of 260 - 360HB | Primary use | 236 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P4.1 - Tool steel with a hardness of < 26HRC | Primary use | 207 ft/min | 0.0127 inch/rev |
P4.2 - Tool steel with a hardness of 26 - 39RC | Primary use | 177 ft/min | 0.0127 inch/rev |
P4.3 - Tool steel with a hardness of 39 - 45HRC | Primary use | 144 ft/min | 0.0091 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Possible use | 197 ft/min | 0.0091 inch/rev |
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Possible use | 167 ft/min | 0.0091 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Possible use | 177 ft/min | 0.0091 inch/rev |
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Possible use | 144 ft/min | 0.0091 inch/rev |
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB | Possible use | 121 ft/min | 0.0068 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M3.1 - Stainless steel, austenitic with a hardness of < 200HB | Possible use | 108 ft/min | 0.0068 inch/rev |
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB | Possible use | 92 ft/min | 0.0068 inch/rev |
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB | Possible use | 85 ft/min | 0.0068 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB | Possible use | 79 ft/min | 0.0068 inch/rev |
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB | Possible use | 69 ft/min | 0.0068 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Primary use | 289 ft/min | 0.017 inch/rev |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Primary use | 213 ft/min | 0.017 inch/rev |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Primary use | 161 ft/min | 0.017 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Primary use | 256 ft/min | 0.0127 inch/rev |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Primary use | 210 ft/min | 0.0127 inch/rev |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Primary use | 167 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Primary use | 230 ft/min | 0.0127 inch/rev |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Primary use | 177 ft/min | 0.0127 inch/rev |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Primary use | 141 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Primary use | 213 ft/min | 0.0127 inch/rev |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Primary use | 161 ft/min | 0.0127 inch/rev |
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB | Primary use | 118 ft/min | 0.0127 inch/rev |
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB | Primary use | 98 ft/min | 0.0127 inch/rev |
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB | Primary use | 85 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Primary use | 240 ft/min | 0.0127 inch/rev |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Primary use | 180 ft/min | 0.0127 inch/rev |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Primary use | 138 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Primary use | 656 ft/min | 0.017 inch/rev |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Primary use | 492 ft/min | 0.017 inch/rev |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Primary use | 328 ft/min | 0.017 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Primary use | 807 ft/min | 0.0127 inch/rev |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Primary use | 728 ft/min | 0.0127 inch/rev |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Primary use | 525 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 978 ft/min | 0.0127 inch/rev |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 577 ft/min | 0.0127 inch/rev |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Primary use | 289 ft/min | 0.0127 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S1.1 - Titanium or titanium alloys, with a hardness of <200HB | Possible use | 144 ft/min | 0.0091 inch/rev |
S1.2 - Titanium alloys, with a hardness of 200 - 280HB | Possible use | 118 ft/min | 0.0091 inch/rev |
S1.3 - Titanium alloys, a hardness of 280 - 360HB | Possible use | 105 ft/min | 0.0068 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H1.1 - Chilled cast iron with a hardness of <440HB | Primary use | 148 ft/min | 0.0091 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H2.1 - Hardened cast iron with a hardness <55HRC | Possible use | 85 ft/min | 0.0091 inch/rev |
H2.2 - Hardened cast iron with a hardness >55HRC | Possible use | 79 ft/min | 0.0091 inch/rev |
Suitability | vc | f | |
---|---|---|---|
H3.1 - Hardened steel with a hardness of <51HRC | Possible use | 98 ft/min | 0.0091 inch/rev |
H3.2 - Hardened steel with a hardness of 51 - 55HRC | Possible use | 79 ft/min | 0.0091 inch/rev |