S5118.0

Ball-Nosed End Mill
Ordering number: 5982882

Short series ball-nose end mill with 4 flutes, diameter 8mm with 19mm length of cut, 100mm overall length and 4mm full profile radius, according to DORMER standard with a 8mm plain shank, solid carbide with X-CEED coating, 30° helix and 10° rake angle for copy milling in steel and cast steel, ferritic and martensitic stainless steel, cast-iron and copper or copper alloys

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Special AlTiN Coating (with highest oxidation resistance)

Hard Material (Solid Carbide)

General Purpose Cutter Type for Low to High Resistance Materials

Cut Length, Short

30° Helix Angle (Flute)

DIN 6535 HA Cylindrical Shank

h9 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial, Diagonal

Dormer Standards

Number of Flutes = 4 (teeth)

Product Operation

Contoured Surfaces (Copy Milling) - Primary use

Product Detail

Description	Value
EAN number	7320760121054
EDP number	0121054
Product name	S5118.0
Ordering code ANSI	S5118.0
Gross weight - grams	73.4
Cutting diameter - millimeter (DC)	8 mm
Corner radius - millimeter (RE)	4 mm
Connection diameter - millimeter (DCON MS)	8 mm
Depth of cut maximum - millimeter (APMX)	19 mm
Overall length - millimeter (OAL)	100 mm
Flute count (NOF)	4
Radial rake angle (GAMF)	10
ANSI	S5118.0
ISO	S5118.0

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	528 ft/min	0.0006 inch/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	594 ft/min	0.0006 inch/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	610 ft/min	0.0006 inch/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	453 ft/min	0.0006 inch/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	397 ft/min	0.0006 inch/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Primary use	354 ft/min	0.0005 inch/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	367 ft/min	0.0006 inch/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Primary use	295 ft/min	0.0005 inch/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Primary use	249 ft/min	0.0005 inch/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Primary use	217 ft/min	0.0005 inch/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Primary use	187 ft/min	0.0005 inch/rev
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Possible use	151 ft/min	0.0005 inch/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Primary use	308 ft/min	0.0006 inch/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Primary use	259 ft/min	0.0006 inch/rev

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Primary use	272 ft/min	0.0006 inch/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Primary use	226 ft/min	0.0005 inch/rev

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Possible use	253 ft/min	0.0005 inch/rev
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Possible use	217 ft/min	0.0005 inch/rev
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Possible use	194 ft/min	0.0004 inch/rev

M4

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Possible use	190 ft/min	0.0004 inch/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Primary use	528 ft/min	0.0006 inch/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Primary use	390 ft/min	0.0006 inch/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Primary use	292 ft/min	0.0006 inch/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Primary use	541 ft/min	0.0006 inch/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Primary use	440 ft/min	0.0006 inch/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Primary use	351 ft/min	0.0005 inch/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Primary use	479 ft/min	0.0006 inch/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Primary use	367 ft/min	0.0006 inch/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Primary use	295 ft/min	0.0005 inch/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Primary use	446 ft/min	0.0005 inch/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Primary use	335 ft/min	0.0005 inch/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Primary use	246 ft/min	0.0005 inch/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Primary use	210 ft/min	0.0004 inch/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Primary use	177 ft/min	0.0004 inch/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Primary use	505 ft/min	0.0005 inch/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Primary use	377 ft/min	0.0005 inch/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Primary use	292 ft/min	0.0005 inch/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Possible use	1165 ft/min	0.0007 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Possible use	876 ft/min	0.0007 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Possible use	587 ft/min	0.0007 inch/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Possible use	587 ft/min	0.0006 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Possible use	525 ft/min	0.0006 inch/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Possible use	377 ft/min	0.0006 inch/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	614 ft/min	0.0006 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	358 ft/min	0.0006 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Possible use	184 ft/min	0.0006 inch/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Possible use	614 ft/min	0.0006 inch/rev
N4.2 - Thermosetting polymers	help_outline Possible use	236 ft/min	0.0006 inch/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

S1

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.1 - Titanium or titanium alloys, with a hardness of <200HB	help_outline Possible use	413 ft/min	0.0005 inch/rev
S1.2 - Titanium alloys, with a hardness of 200 - 280HB	help_outline Possible use	367 ft/min	0.0005 inch/rev

S2

S2 - Fe-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S2.1 - High-temperature Fe-based alloys with a hardness of <200HB	help_outline Possible use	282 ft/min	0.0004 inch/rev

S3

S3 - Ni-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S3.1 - High-temperature Ni-based alloys with a hardness of <280HB	help_outline Possible use	213 ft/min	0.0004 inch/rev

S4

S4 - Co-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S4.1 - High-temperature Co-based alloys with a hardness of <240HB	help_outline Possible use	167 ft/min	0.0004 inch/rev