C24736.0

End Mill
Ordering number: 5984707

Short series end mill with 6 flutes, diameter 36mm with 53mm length of cut, 133mm overall length and 72.5mm reach with neck relief, according to DIN 844 K standard with a 32mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining and plain carbon steel and copper or copper alloys

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Bright (uncoated)

High Speed Cobalt Powder Metal Tool Material

General Purpose Cutter Type for Low to High Resistance Materials

Cut Length, Short

30° Helix Angle (Flute)

DIN 1835B Weldon Shank

k10 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial, Diagonal, Axial

DIN 844 K – End Mill Standards

Number of Flutes = 6 (teeth)

Product Operation

Shallow Shoulder Milling - Primary use

Shallow Slot Milling - Primary use

Ramping - Primary use

Helical Interpolation - Possible use

Product Detail

Description	Value
EAN number	7320760609378
EDP number	0609378
Product name	C24736.0
Ordering code ANSI	C24736.0
Gross weight - grams	834.4
Cutting diameter - millimeter (DC)	36 mm
Connection diameter - millimeter (DCON MS)	32 mm
Depth of cut maximum - millimeter (APMX)	53 mm
Overall length - millimeter (OAL)	133 mm
Flute count (NOF)	6
Usable Length - millimeter (LU)	72.5 mm
Neck diameter - millimeter (DN)	31.5 mm
Radial rake angle (GAMF)	12
With Neck	Yes
ANSI	C24736.0
ISO	C24736.0

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	174 ft/min	0.0025 inch/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	194 ft/min	0.0025 inch/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	200 ft/min	0.0025 inch/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	148 ft/min	0.0025 inch/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	131 ft/min	0.0025 inch/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Possible use	118 ft/min	0.0025 inch/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Possible use	95 ft/min	0.002 inch/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Possible use	72 ft/min	0.002 inch/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Possible use	112 ft/min	0.0025 inch/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Possible use	95 ft/min	0.0025 inch/rev

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Possible use	102 ft/min	0.0025 inch/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Possible use	82 ft/min	0.002 inch/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Possible use	98 ft/min	0.0025 inch/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Possible use	72 ft/min	0.0025 inch/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Possible use	56 ft/min	0.0025 inch/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Possible use	180 ft/min	0.0025 inch/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Possible use	148 ft/min	0.0025 inch/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Possible use	118 ft/min	0.002 inch/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Possible use	161 ft/min	0.0025 inch/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Possible use	121 ft/min	0.0025 inch/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Possible use	98 ft/min	0.0016 inch/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Possible use	148 ft/min	0.002 inch/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Possible use	112 ft/min	0.002 inch/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Possible use	82 ft/min	0.002 inch/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Possible use	72 ft/min	0.0016 inch/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Possible use	59 ft/min	0.0016 inch/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Possible use	167 ft/min	0.002 inch/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Possible use	128 ft/min	0.002 inch/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Possible use	98 ft/min	0.002 inch/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Possible use	312 ft/min	0.0038 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Possible use	233 ft/min	0.0031 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Possible use	157 ft/min	0.0031 inch/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Possible use	157 ft/min	0.0025 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Possible use	141 ft/min	0.0025 inch/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Possible use	102 ft/min	0.0025 inch/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	164 ft/min	0.0025 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	95 ft/min	0.0025 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Primary use	49 ft/min	0.0025 inch/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Possible use	164 ft/min	0.0025 inch/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

S1

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.1 - Titanium or titanium alloys, with a hardness of <200HB	help_outline Primary use	98 ft/min	0.002 inch/rev
S1.2 - Titanium alloys, with a hardness of 200 - 280HB	help_outline Possible use	82 ft/min	0.002 inch/rev

S2

S2 - Fe-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S2.1 - High-temperature Fe-based alloys with a hardness of <200HB	help_outline Possible use	66 ft/min	0.0016 inch/rev

S3

S3 - Ni-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S3.1 - High-temperature Ni-based alloys with a hardness of <280HB	help_outline Possible use	49 ft/min	0.0016 inch/rev

S4

S4 - Co-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S4.1 - High-temperature Co-based alloys with a hardness of <240HB	help_outline Possible use	39 ft/min	0.0016 inch/rev