D751350.0X2.5X350

Metal slitting saw Coarse
Ordering number: 5985668

Metal slitting saw with coarse pitch and 350 teeth, diameter 350mm with 2.5mm width of cut, according to DORMER standard with a 32mm bore and standard driving pin holes, HSS with steam tempered finish, and 18° rake angle for cut-of sawing, tube sawing and shallow slotting in steel and cast steel, cast-iron and non-ferrous metals

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Steam Tempered (Steam Oxide) Surface Treatment

High Speed Steel Tool Material

Fine Pitch

Dormer Standards

Product Operation

Shallow Slot Milling - Primary use

Deep Slot Milling - Possible use

Milling – Cut-off Sawing - Primary use

Milling – Tube Sawing - Primary use

Product Detail

Description	Value
EAN number	7320760285879
EDP number	0285879
Product name	D751350.0X2.5X350
Ordering code ANSI	D751350.0X2.5X350
Gross weight - grams	1800
Cutting diameter - millimeter (DC)	350 mm
Cutting width - millimeter (CW)	2.5 mm
Connection diameter - millimeter (DCON MS)	32 mm
Flute count (NOF)	350
Pitch of the blade - millimeter	3 mm
Hub diameter - millimeter (DHUB)	120 mm
Diameter access hole - millimeter (DAH)	8 mm
Diameter bolt circle 4 - millimeter (DBC4)	45 mm
Diameter access hole 2 - millimeter (DAH2)	9 mm
Diameter bolt circle 5 - millimeter (DBC5)	50 mm
Diameter access hole 3 - millimeter (DAH3)	11 mm
Diameter bolt circle 6 - millimeter (DBC6)	63 mm
Radial rake angle (GAMF)	18
ANSI	D751350.0X2.5X350
ISO	D751350.0X2.5X350

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	131 ft/min	0.0016 inch/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	148 ft/min	0.0016 inch/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	151 ft/min	0.0016 inch/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	112 ft/min	0.0016 inch/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	98 ft/min	0.0016 inch/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	95 ft/min	0.0079 inch/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Primary use	79 ft/min	0.0079 inch/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Primary use	59 ft/min	0.0079 inch/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Possible use	46 ft/min	0.0079 inch/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Possible use	39 ft/min	0.0079 inch/rev

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Possible use	39 ft/min	0.0079 inch/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Possible use	33 ft/min	0.0079 inch/rev

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Possible use	39 ft/min	0.0079 inch/rev
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Possible use	33 ft/min	0.0079 inch/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Primary use	131 ft/min	0.0016 inch/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Primary use	98 ft/min	0.0016 inch/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Primary use	72 ft/min	0.0016 inch/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Primary use	121 ft/min	0.0016 inch/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Primary use	98 ft/min	0.0016 inch/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Primary use	108 ft/min	0.0016 inch/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Primary use	82 ft/min	0.0016 inch/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Primary use	98 ft/min	0.0079 inch/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Primary use	75 ft/min	0.0079 inch/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Primary use	112 ft/min	0.0016 inch/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Primary use	85 ft/min	0.0016 inch/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Primary use	1969 ft/min	0.0236 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Primary use	1476 ft/min	0.0236 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Primary use	984 ft/min	0.0236 inch/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Primary use	2523 ft/min	0.0236 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Primary use	2270 ft/min	0.0236 inch/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Primary use	1640 ft/min	0.0236 inch/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	1112 ft/min	0.0236 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	656 ft/min	0.0236 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Primary use	328 ft/min	0.0016 inch/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Primary use	197 ft/min	0.0236 inch/rev