R18HN70
R18H Jobber Drill
Ordering number: 5998103
Jobber length drill with straight shank, diameter 0.0280" (N70) with an overall length of 1.1/4" and flute length of 3/8" according to ANSI standard with 118° point angle, HSS with bright finish for 4xD drilling without pecking in non-ferrous material
Product Feature
Product Detail
Description | Value |
---|---|
EAN number | 086071185709 |
EDP number | 018570 |
Product name | R18HN70 |
Ordering code ANSI | R18HN70 |
Gross weight - grams | 0.09 |
Length chip flute - inch (LCF) | 0.375 inch |
Cutting diameter - inch (DC) | 0.028 inch |
Cutting diameter - millimeter (DC) | 0.71 mm |
Length chip flute - fractional inch (LCF) | 3/8 |
Overall length - fractional inch (OAL) | 1.1/4 |
Overall length - inch (OAL) | 1.25 inch |
Overall length - millimeter (OAL) | 31.75 mm |
ANSI | R18HN70 |
ISO | R18HN70 |
Cutting diameter (wire gauge size) (DC) | N70 |
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Possible use | 108 ft/min | 0.0006 inch/rev |
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Possible use | 108 ft/min | 0.0006 inch/rev |
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Possible use | 92 ft/min | 0.0006 inch/rev |
Suitability | vc | f | |
---|---|---|---|
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Possible use | 92 ft/min | 0.0006 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB | Possible use | 82 ft/min | 0.0005 inch/rev |
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB | Possible use | 62 ft/min | 0.0004 inch/rev |
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB | Possible use | 46 ft/min | 0.0004 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K2.1 - Malleable iron, ferritic with a hardness of < 160HB | Possible use | 66 ft/min | 0.0004 inch/rev |
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB | Possible use | 52 ft/min | 0.0004 inch/rev |
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB | Possible use | 43 ft/min | 0.0004 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB | Possible use | 56 ft/min | 0.0004 inch/rev |
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB | Possible use | 43 ft/min | 0.0004 inch/rev |
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB | Possible use | 36 ft/min | 0.0004 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K4.1 - Austenitic cast iron with a hardness of < 180HB | Possible use | 52 ft/min | 0.0004 inch/rev |
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB | Possible use | 39 ft/min | 0.0004 inch/rev |
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB | Possible use | 30 ft/min | 0.0004 inch/rev |
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB | Possible use | 26 ft/min | 0.0004 inch/rev |
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB | Possible use | 20 ft/min | 0.0004 inch/rev |
Suitability | vc | f | |
---|---|---|---|
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB | Possible use | 59 ft/min | 0.0004 inch/rev |
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB | Possible use | 46 ft/min | 0.0004 inch/rev |
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB | Possible use | 36 ft/min | 0.0004 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Primary use | 148 ft/min | 0.0007 inch/rev |
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Primary use | 112 ft/min | 0.0007 inch/rev |
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Primary use | 75 ft/min | 0.0007 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N2.1 - Cast aluminium alloys with a hardness of < 75HB | Primary use | 151 ft/min | 0.0005 inch/rev |
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Primary use | 138 ft/min | 0.0005 inch/rev |
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Primary use | 98 ft/min | 0.0005 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 200 ft/min | |
N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 118 ft/min | 0.0005 inch/rev |
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Primary use | 59 ft/min | 0.0006 inch/rev |
Suitability | vc | f | |
---|---|---|---|
N4.1 - Thermoplastic polymers | Primary use | 138 ft/min | 0.0007 inch/rev |
N4.2 - Thermosetting polymers | Primary use | 131 ft/min | 0.0006 inch/rev |
N4.3 - Reinforced polymers or composites | Primary use | 66 ft/min | 0.0005 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S1.1 - Titanium or titanium alloys, with a hardness of <200HB | Possible use | 49 ft/min | 0.0004 inch/rev |