Bright (uncoated)
15726-32H3NO2
1572 UND Hand Tap, Screw Thread Insert
Ordering number: 6007013
Straight flute hand tap NO2 with a 4-6xP second lead, for Unified National Coarse thread UNC 6 with 32 TPI and 2B class of fit with H3 pitch diameter limits, dimensions according to ANSI standard with 0.1940" shank and 0.1520" square drive, HSS with bright finish for 1.5xD through or blind hole threading in wrought or cast aluminium and copper or copper alloys
Product Feature
Thread Form, Unified Coarse
ANSI – Tap Standards
Thread tolerance class 3B
1.5×D Usable Tool Depth to Diameter Ratio
High Speed Steel Tool Material
Straight Flute Geometry
Right Hand Rotation / Cutting
Product Detail
Description | Value |
|---|---|
| Product name | 15726-32H3NO2 |
| EDP number | 1010427 |
| EAN number | 698464021220 |
| Thread diameter size (TDZ) | 6 |
| Threads per inch (TPI) | 32 |
| Overall length - millimeter (OAL) | 60.33 mm |
| Overall length - inch (OAL) | 2.375 inch |
| Overall length - fractional inch (OAL) | 2.3/8 |
| Threading length - millimeter (THL) | 22.23 mm |
| Threading length - inch (THL) | 0.875 inch |
| Threading length - fractional inch (THL) | 7/8 |
| Connection diameter - inch (DCON MS) | 0.194 inch |
| Connection diameter - millimeter (DCON MS) | 4.93 mm |
| Flute count (NOF) | 3 |
| Tolerance limit | H3 |
| Clamping width - inch (WSC) | 0.152 inch |
| Clamping width - millimeter (WSC) | 3.86 mm |
| Clamping Length - fractional inch (LCS) | 1/4 |
| Clamping Length - inch (LCS) | 0.25 inch |
| Clamping Length - millimeter (LSC) | 6.35 mm |
| Gross weight - grams | 9 |
| ANSI | 15726-32H3NO2 |
| ISO | 15726-32H3NO2 |
| Ordering code ANSI | 15726-32H3NO2 |
Cutting Conditions
| Suitability | vc | f | |
|---|---|---|---|
| P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB | Possible use | 36 ft/min | |
| P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB | Possible use | 39 ft/min | |
| P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB | Possible use | 39 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB | Possible use | 30 ft/min | |
| P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB | Possible use | 26 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| P3.1 - Alloy steel with a hardness of < 180HB | Possible use | 23 ft/min | |
| P3.2 - Alloy steel with a hardness of 180 - 260HB | Possible use | 20 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| P4.1 - Tool steel with a hardness of < 26HRC | Possible use | 13 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| M1.1 - Stainless steel, ferritic with a hardness of < 160HB | Possible use | 23 ft/min | |
| M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB | Possible use | 20 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| M2.1 - Stainless steel, martensitic with a hardness of < 200HB | Possible use | 20 ft/min | |
| M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB | Possible use | 16 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| M3.1 - Stainless steel, austenitic with a hardness of < 200HB | Possible use | 7 ft/min | |
| M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB | Possible use | 7 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB | Primary use | 39 ft/min | |
| N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB | Primary use | 30 ft/min | |
| N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB | Primary use | 20 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| N2.1 - Cast aluminium alloys with a hardness of < 75HB | Primary use | 92 ft/min | |
| N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB | Primary use | 82 ft/min | |
| N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB | Primary use | 59 ft/min |
| Suitability | vc | f | |
|---|---|---|---|
| N3.1 - Free-cutting copper-alloys materials with excellent machining properties | Primary use | 112 ft/min | |
| N3.2 - Short-chip copper-alloys with good to moderate machining properties | Primary use | 66 ft/min | |
| N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties | Primary use | 33 ft/min |