20253/4X14

2025 NPT Dienut
Ordering number: 6009103

Hexagon die nut, for National Pipe Taper thread NPT 3/4" with 14 TPI, dimensions according to ANSI standard with 2" width across flat and 13/16" thickness, made from chromium tool steel with bright finish for repairing damaged thread in free machining and plain carbon steel and gray, malleable, ductile and compacted graphite cast-iron

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Bright (uncoated)

Thread Form, American National Pipe Taper

ANSI – Tap Standards

Chromium Steel Tool Material

Right Hand Rotation / Cutting

Product Detail

Description	Value
EAN number	698464039072
Product name	20253/4X14
Thread diameter size (TDZ)	3/4
EDP number	1410274
Threads per inch (TPI)	14
Ordering code ANSI	20253/4X14
Drive size - fractional inch (DRVS)	2"
Overall length - fractional inch (OAL)	13/16
Drive size - inch (DRVS)	2 inch
Drive size - millimeter (DRVS)	50.8 mm
Overall length - inch (OAL)	0.8125 inch
Overall length - millimeter (OAL)	20.64 mm
ANSI	20253/4X14
ISO	20253/4X14

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	26 ft/min
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	30 ft/min
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	30 ft/min

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	23 ft/min
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	20 ft/min

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Possible use	20 ft/min
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Possible use	16 ft/min

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Possible use	10 ft/min

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Possible use	7 ft/min
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Possible use	7 ft/min

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Possible use	7 ft/min
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Possible use	7 ft/min

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Possible use	7 ft/min
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Possible use	7 ft/min

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Primary use	26 ft/min
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Primary use	20 ft/min
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Possible use	13 ft/min

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Primary use	23 ft/min
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Primary use	20 ft/min
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Possible use	16 ft/min

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Primary use	23 ft/min
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Primary use	16 ft/min
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Possible use	13 ft/min

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Primary use	23 ft/min
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Primary use	16 ft/min
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Possible use	13 ft/min

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Possible use	52 ft/min
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Possible use	39 ft/min
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Possible use	26 ft/min

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Possible use	26 ft/min
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Possible use	23 ft/min
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Possible use	16 ft/min

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	26 ft/min
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Possible use	16 ft/min
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Possible use	10 ft/min

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c
N4.1 - Thermoplastic polymers	help_outline Possible use	26 ft/min
N4.2 - Thermosetting polymers	help_outline Possible use	10 ft/min
N4.3 - Reinforced polymers or composites	help_outline Possible use	10 ft/min