E299M5X.5

MF Machine Tap Spiral Point, Yellow Shark
Ordering number: 6290607

Spiral point tap Yellow Shark with chamfer form B with a 3.5-5xP second lead, for ISO-Metric Fine thread M5 with 0.50 mm pitch and 6H class of fit, dimensions according to DIN 374 standard with 3.5mm shank and 2.7mm square drive, powder metallurgical HSS-E with flash chorme surface finish for 2.5xD through hole threading in free machining and plain carbon steel and copper or copper alloys

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Flash Chrome (Hard Chrome) Plating

Thread Form, Metric Fine

DIN 374 – MF Thread Standard

DIN Thread Pitch Diameter Tolerance Zone (high basic pitch diameter)

Through Hole Application

2.5×D Usable Tool Depth to Diameter Ratio

High Speed Cobalt Powder Metal Tool Material

Plug Tap Chamfer (3.5 – 5 Pitch Lead)

Spiral Point Geometry

Right Hand Rotation / Cutting

Product Detail

Description	Value
Product name	E299M5X.5
EDP number	46290607
EAN number	7320760663271
Product Line	SHARK
Thread diameter size (TDZ)	5
Thread pitch - millimeter (TP)	0.5 mm
Overall length - millimeter (OAL)	70 mm
Overall length - inch (OAL)	2.7559 inch
Threading length - millimeter (THL)	13 mm
Threading length - inch (THL)	0.5118 inch
Connection diameter - inch (DCON MS)	0.1378 inch
Connection diameter - millimeter (DCON MS)	3.5 mm
Flute count (NOF)	3
Clamping width - inch (WSC)	0.1063 inch
Clamping width - millimeter (WSC)	2.7 mm
Clamping Length - inch (LCS)	0.2362 inch
Clamping Length - millimeter (LSC)	6 mm
Premachined hole diameter - inch (PHD)	0.1772 inch
Premachined hole diameter - millimeter (PHD)	4.5 mm
Gross weight - grams	8.3
ANSI	E299M5X.5
ISO	E299M5X.5
Ordering code ANSI	E299M5X.5

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	79 ft/min
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	89 ft/min
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	92 ft/min

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	66 ft/min
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	59 ft/min
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Possible use	52 ft/min

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	49 ft/min
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Possible use	39 ft/min

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Possible use	30 ft/min

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	167 ft/min
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	98 ft/min
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Possible use	49 ft/min