S2291.5XD4

Ball-Nosed End Mill
Ordering number: 6706514

Extra short series ball-nose end mill with 2 flutes, diameter 1.5mm with 3mm length of cut, 50mm overall length, 6mm reach with neck relief and 0.75mm full profile radius, according to DORMER standard with a 4mm plain shank, solid carbide with TiSiN coating, 30° helix and 3° rake angle for copy milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel and high-temperature alloys

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Titanium Silicon Nitride Coating

Hard Material (Solid Carbide)

General Purpose Cutter Type for Low to High Resistance Materials

Cut Length, Extra Short

30° Helix Angle (Flute)

DIN 6535 HA Cylindrical Shank

h9 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial, Diagonal

Dormer Standards

Number of Flutes = 2 (teeth)

Product Operation

Contoured Surfaces (Copy Milling) - Primary use

Product Detail

Description	Value
EAN number	7320760680636
EDP number	46706514
Product name	S2291.5XD4
Ordering code ANSI	S2291.5XD4
Gross weight - grams	15
Cutting diameter - millimeter (DC)	1.5 mm
Corner radius - millimeter (RE)	0.75 mm
Connection diameter - millimeter (DCON MS)	4 mm
Depth of cut maximum - millimeter (APMX)	3 mm
Overall length - millimeter (OAL)	50 mm
Flute count (NOF)	2
Usable Length - millimeter (LU)	6 mm
Neck diameter - millimeter (DN)	1.4 mm
Radial rake angle (GAMF)	3
With Neck	Yes
ANSI	S2291.5XD4
ISO	S2291.5XD4

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Primary use	262 ft/min	0.0001 inch/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB	help_outline Primary use	262 ft/min	0.0001 inch/rev

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Primary use	269 ft/min	0.0001 inch/rev

M4

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Primary use	262 ft/min	0.0001 inch/rev
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB	help_outline Primary use	223 ft/min	0.0001 inch/rev

S - High-temperature alloys (superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)

S1

S1 - Titanium or titanium alloys

navigate_next

	Suitability	v_c	f
S1.3 - Titanium alloys, a hardness of 280 - 360HB	help_outline Primary use	190 ft/min	0.0001 inch/rev

S2

S2 - Fe-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S2.2 - High-temperature Fe-based alloys with a hardness of 200-280HB	help_outline Primary use	154 ft/min	0.0001 inch/rev

S3

S3 - Ni-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S3.2 - High-temperature Ni-based alloys with a hardness of 280 - 360HB	help_outline Primary use	108 ft/min	0.0001 inch/rev

S4

S4 - Co-based high-temperature alloys

navigate_next

	Suitability	v_c	f
S4.2 - High-temperature Co-based alloys with a hardness of 240 - 320HB	help_outline Primary use	89 ft/min	0.0001 inch/rev