S6118.0

End Mill
Ordering number: 6706585

Short series end mill with 2 flutes, diameter 8mm with 20mm length of cut, 80mm overall length, 40mm reach with neck relief and 0.1mm corner radii, according to DORMER standard with a 8mm plain shank, solid carbide with polished finish, 30° helix and 20° rake angle for shoulder milling, slot milling, ramping and helical milling in non-ferrous metals

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Polished Bright Surface Finish

Hard Material (Solid Carbide)

Non-ferrous Cutter Type for Soft Malleable Materials

Cut Length, Short

30° Helix Angle (Flute)

DIN 6535 HA Cylindrical Shank

h9 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial, Diagonal, Axial

Dormer Standards

Number of Flutes = 2 (teeth)

Product Operation

Shallow Shoulder Milling - Possible use

Deep Shoulder Milling - Primary use

Plunge Milling - Possible use

Shallow Slot Milling - Primary use

Deep Slot Milling - Possible use

Ramping - Primary use

Helical Interpolation - Primary use

Drilling - Possible use

Product Detail

Description	Value
EAN number	7320760681343
EDP number	46706585
Product name	S6118.0
Ordering code ANSI	S6118.0
Gross weight - grams	54.5
Cutting diameter - millimeter (DC)	8 mm
Corner radius - millimeter (RE)	0.1 mm
Connection diameter - millimeter (DCON MS)	8 mm
Depth of cut maximum - millimeter (APMX)	20 mm
Overall length - millimeter (OAL)	80 mm
Flute count (NOF)	2
Usable Length - millimeter (LU)	40 mm
Neck diameter - millimeter (DN)	7.4 mm
Radial rake angle (GAMF)	20
With Neck	Yes
ANSI	S6118.0
ISO	S6118.0

Features & benefits

Micrograin Carbide providing extreme hardness and wear resistance providing increased tool life when machining difficult materials
Ground polished finish to prevent work material from sticking to the the cutting edges
Specific geometry designed for slot milling, ramping and plunging
Cutters designed for producing slots

Cutting Conditions

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Primary use	2093 ft/min	0.006 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Primary use	1575 ft/min	0.006 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Primary use	1053 ft/min	0.006 inch/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Primary use	1053 ft/min	0.0045 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Primary use	945 ft/min	0.0045 inch/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Primary use	676 ft/min	0.0045 inch/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	1102 ft/min	0.0045 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	646 ft/min	0.0045 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Primary use	331 ft/min	0.0045 inch/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Primary use	1102 ft/min	0.0072 inch/rev
N4.2 - Thermosetting polymers	help_outline Primary use	427 ft/min	0.0072 inch/rev