S6104.0XD4

End Mill
Ordering number: 6706594

Short series end mill with 2 flutes, diameter 4mm with 12mm length of cut, 50mm overall length and 0.1mm corner radii, according to DORMER standard with a 4mm plain shank, solid carbide with polished finish, 30° helix and 20° rake angle for shoulder milling, slot milling and ramping in non-ferrous metals

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Polished Bright Surface Finish

Hard Material (Solid Carbide)

Non-ferrous Cutter Type for Soft Malleable Materials

Cut Length, Short

30° Helix Angle (Flute)

DIN 6535 HA Cylindrical Shank

h9 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial, Diagonal, Axial

Dormer Standards

Number of Flutes = 2 (teeth)

Product Operation

Shallow Shoulder Milling - Primary use

Deep Shoulder Milling - Possible use

Plunge Milling - Possible use

Shallow Slot Milling - Primary use

Deep Slot Milling - Primary use

Ramping - Primary use

Drilling - Possible use

Product Detail

Description	Value
EAN number	7320760681435
EDP number	46706594
Product name	S6104.0XD4
Ordering code ANSI	S6104.0XD4
Gross weight - grams	10.8
Cutting diameter - millimeter (DC)	4 mm
Corner radius - millimeter (RE)	0.1 mm
Connection diameter - millimeter (DCON MS)	4 mm
Depth of cut maximum - millimeter (APMX)	12 mm
Overall length - millimeter (OAL)	50 mm
Flute count (NOF)	2
Radial rake angle (GAMF)	20
ANSI	S6104.0XD4
ISO	S6104.0XD4

Features & benefits

Ground polished finish to prevent work material from sticking to the the cutting edges
Cutters designed for producing slots
Micrograin Carbide providing extreme hardness and wear resistance providing increased tool life when machining difficult materials
Specific geometry designed for slot milling, ramping and plunging

Cutting Conditions

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Primary use	2326 ft/min	0.0033 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Primary use	1749 ft/min	0.0033 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Primary use	1171 ft/min	0.0033 inch/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Primary use	1171 ft/min	0.0024 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Primary use	1050 ft/min	0.0024 inch/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Primary use	751 ft/min	0.0024 inch/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Primary use	1224 ft/min	0.0024 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Primary use	719 ft/min	0.0024 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Primary use	367 ft/min	0.0024 inch/rev

N4

N4 - Polymers(synthetic or semi-synthetic materials)

navigate_next

	Suitability	v_c	f
N4.1 - Thermoplastic polymers	help_outline Primary use	1224 ft/min	0.0039 inch/rev
N4.2 - Thermosetting polymers	help_outline Primary use	472 ft/min	0.0039 inch/rev