Diamond Like Coating
S6128.0
End Mill
Ordering number: 6706613
Short series end mill with 4 flutes, diameter 8mm with 20mm length of cut and 64mm overall length, according to DORMER standard with a 8mm plain shank, solid carbide with Diamond coating, 40° helix and 10° rake angle for shoulder milling and plunging in graphite
Product Feature
Hard Material (Solid Carbide)
General Purpose Cutter Type for Low to High Resistance Materials
Cut Length, Short
40° Helix Angle (Flute)
DIN 6535 HA Cylindrical Shank
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
Radial, Diagonal, Axial
Dormer Standards
Number of Flutes = 4 (teeth)
Product Operation
Shallow Shoulder Milling - Primary use
Deep Shoulder Milling - Possible use
Plunge Milling - Primary use
Shallow Slot Milling - Possible use
Ramping - Possible use
Progressive Plunging - Possible use
Product Detail
Description | Value |
|---|---|
| EAN number | 7320760681626 |
| EDP number | 46706613 |
| Product name | S6128.0 |
| Ordering code ANSI | S6128.0 |
| Gross weight - grams | 48.9 |
| Cutting diameter - millimeter (DC) | 8 mm |
| Connection diameter - millimeter (DCON MS) | 8 mm |
| Depth of cut maximum - millimeter (APMX) | 20 mm |
| Overall length - millimeter (OAL) | 64 mm |
| Flute count (NOF) | 4 |
| Radial rake angle (GAMF) | 10 |
| ANSI | S6128.0 |
| ISO | S6128.0 |
Cutting Conditions
| Suitability | vc | f | |
|---|---|---|---|
| N5.1 - Graphite | Primary use | 1148 ft/min | 0.001 inch/rev |